Bags of Decomposed Granite for a 10x30 Patio
How many bags of decomposed granite for a 10x30 patio: at 3 inches deep you need about 75.0 cubic feet, which is 150 bags of the common 0.5 cubic foot size. If your store sells decomposed granite in 50-pound bags instead, figure about 150 bags, since decomposed granite weighs roughly 100 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 25.0 | 50 | 50 |
| 2 in | 50.0 | 100 | 100 |
| 3 in | 75.0 | 150 | 150 |
| 4 in | 100.0 | 200 | 200 |
How to figure it
- Area: 10 × 30 = 300 sq ft.
- Volume: 300 × (3 ÷ 12) = 75.0 cu ft.
- Bags: 75.0 ÷ 0.5 = 150 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 75.0 cubic feet is 2.78 yards, about 3.8 tons. Past about a yard, bulk is usually less work and often less money. Compare the bag price × 150 against a bulk quote for 4.1 tons delivered.
About decomposed granite
DG should be laid in thin lifts, wetted and compacted. Loose DG at a deep depth stays soft and tracks onto shoes.
Before you spread for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Where decomposed granite fits
Good uses:
- Garden paths and patios with a natural look
- Around trees and in xeriscape designs
- Stabilized DG for accessible paths
Less suited to:
- Steep grades without a stabilizer
- Areas right outside doors, since fines track in
- Driveways with heavy turning traffic
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of decomposed granite (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.1 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many bags of decomposed granite for a 10x30 patio?
About 150 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of decomposed granite for 10x30?
About 150 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 10x30 patio at 3 inches?
About 75.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Decomposed Granite for a 10x20 Patio
- Bags of Decomposed Granite for a 10x24 Patio
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.