Bags of Pea Gravel for a 14x30 Patio
How many bags of pea gravel for a 14x30 patio: at 3 inches deep you need about 105.0 cubic feet, which is 210 bags of the common 0.5 cubic foot size. If your store sells pea gravel in 50-pound bags instead, figure about 218 bags, since pea gravel weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 35.0 | 70 | 73 |
| 2 in | 70.0 | 140 | 146 |
| 3 in | 105.0 | 210 | 218 |
| 4 in | 140.0 | 280 | 291 |
How to figure it
- Area: 14 × 30 = 420 sq ft.
- Volume: 420 × (3 ÷ 12) = 105.0 cu ft.
- Bags: 105.0 ÷ 0.5 = 210 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 105.0 cubic feet is 3.89 yards, about 5.4 tons. At this size, a bulk delivery usually beats a cart full of bags once you count trips. Compare the bag price × 210 against a bulk quote for 6.0 tons delivered.
About pea gravel
Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put.
Laying it down for a patio
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Where pea gravel fits
Works well for:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Poor fit for:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 8x16 area at 4 inches takes about 2.2 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
Questions people ask
How many bags of pea gravel for a 14x30 patio?
About 210 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of pea gravel for 14x30?
About 218 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 14x30 patio at 3 inches?
About 105.0 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Pea Gravel for a 14x20 Patio
- Bags of Pea Gravel for a 14x24 Patio
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.
