Bags of Pea Gravel for a 3x50 Walkway

How many bags of pea gravel for a 3x50 walkway: at 3 inches deep you need about 37.5 cubic feet, which is 75 bags of the common 0.5 cubic foot size. If your store sells pea gravel in 50-pound bags instead, figure about 78 bags, since pea gravel weighs roughly 104 pounds per cubic foot.

Volume and tonnage calculator →

Bag count by depth

Depth	Cubic feet	0.5 cu ft bags	50 lb bags (approx.)
1 in	12.5	25	26
2 in	25.0	50	52
3 in	37.5	75	78
4 in	50.0	100	104

How to figure it

Area: 3 × 50 = 150 sq ft.
Volume: 150 × (3 ÷ 12) = 37.5 cu ft.
Bags: 37.5 ÷ 0.5 = 75 bags (round up).

Bags or bulk?

A cubic yard is 27 cubic feet, so 37.5 cubic feet is 1.39 yards, about 1.9 tons. At this size, a bulk delivery usually beats a cart full of bags once you count trips. Compare the bag price × 75 against a bulk quote for 2.1 tons delivered.

About pea gravel

Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put.

Install tips for a walkway

Dig and level. Remove sod and set the base slightly below the surrounding grade.
Edge it. Steel, plastic or stone edging keeps material in place.
Spread in layers. Rake to depth, then rake smooth; rounded stone will not compact.
Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.

The volume and tonnage calculator handles other sizes and depths.

When to choose pea gravel

Good uses:

Patios, walkways and dog runs
Play areas with proper depth and edging
Drainage around foundations when sized properly

Think twice for:

Driveways and steep paths, where it rolls and ruts
Under pavers as a base
Areas without edging

Quick reference numbers

Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
Per inch over 1,000 sq ft: about 4.3 tons.
Another size for comparison: a 10x20 area at 2 inches takes about 1.7 tons.
Weight used here: about 1.4 tons per cubic yard.

Mistakes that throw off the order

Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.

Questions people ask

How many bags of pea gravel for a 3x50 walkway?

About 75 bags of 0.5 cubic feet at 3 inches deep.

How many 50 lb bags of pea gravel for 3x50?

About 78 bags at 3 inches.

How many 0.5 cubic foot bags are in a cubic yard?

54 bags.

How many cubic feet is a 3x50 walkway at 3 inches?

About 37.5 cubic feet.

When does bulk make more sense?

Usually once the job passes about a cubic yard, or when you would need more than a few car trips.

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.