Bags of Crushed Stone for a 3x50 Walkway
How many bags of crushed stone for a 3x50 walkway: at 3 inches deep you need about 37.5 cubic feet, which is 75 bags of the common 0.5 cubic foot size. If your store sells crushed stone in 50-pound bags instead, figure about 78 bags, since crushed stone weighs roughly 104 pounds per cubic foot.
Volume and tonnage calculator →Bag count by depth
| Depth | Cubic feet | 0.5 cu ft bags | 50 lb bags (approx.) |
|---|---|---|---|
| 1 in | 12.5 | 25 | 26 |
| 2 in | 25.0 | 50 | 52 |
| 3 in | 37.5 | 75 | 78 |
| 4 in | 50.0 | 100 | 104 |
How to figure it
- Area: 3 × 50 = 150 sq ft.
- Volume: 150 × (3 ÷ 12) = 37.5 cu ft.
- Bags: 37.5 ÷ 0.5 = 75 bags (round up).
Bags or bulk?
A cubic yard is 27 cubic feet, so 37.5 cubic feet is 1.39 yards, about 1.9 tons. At this size, a bulk delivery usually beats a cart full of bags once you count trips. Compare the bag price × 75 against a bulk quote for 2.1 tons delivered.
About crushed stone
Most quarries sell crushed stone by a size number or a screen size. Clean crushed stone drains well; stone with fines packs harder but sheds water more slowly.
Laying it down for a walkway
- Dig and level. Remove sod and set the base slightly below the surrounding grade.
- Edge it. Steel, plastic or stone edging keeps material in place.
- Spread in layers. Rake to depth, then tamp or wet and compact.
- Buy a few extra. Grab 5 to 10 percent more bags for settling and touch-ups.
The volume and tonnage calculator handles other sizes and depths.
Good and poor uses for crushed stone
Works well for:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Poor fit for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 15x30 area at 4 inches takes about 7.8 tons.
- Weight used here: about 1.4 tons per cubic yard.
Common estimating mistakes
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many bags of crushed stone for a 3x50 walkway?
About 75 bags of 0.5 cubic feet at 3 inches deep.
How many 50 lb bags of crushed stone for 3x50?
About 78 bags at 3 inches.
How many 0.5 cubic foot bags are in a cubic yard?
54 bags.
How many cubic feet is a 3x50 walkway at 3 inches?
About 37.5 cubic feet.
When does bulk make more sense?
Usually once the job passes about a cubic yard, or when you would need more than a few car trips.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- Bags of Crushed Stone for a 3x30 Walkway
- Bags of Crushed Stone for a 3x40 Walkway
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.