How Much #57 Stone for an 8x10 Chicken Run?
An 8 by 10 foot chicken run covers 80 square feet. At 3 inches of #57 stone, plan on 0.74 cubic yards, or about 1.0 tons, which answers how much #57 stone for an 8x10 chicken run.
Volume and tonnage calculator →The math
- Area: 80.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 80.0 × 0.250 ÷ 27 = 0.74 yd³.
- Tons: × about 1.35 tons per yard = 1.0 tons.
The crushed stone calculator does this for any size.
Related: How Much #57 Stone for a 10x10 Chicken Run?
#57 stone needed by depth
| Depth | Cubic yards | Tons of #57 stone | Tons +10% |
|---|---|---|---|
| 2 in | 0.49 | 0.7 | 0.7 |
| 3 in | 0.74 | 1.0 | 1.1 |
| 4 in | 0.99 | 1.3 | 1.5 |
| 6 in | 1.48 | 2.0 | 2.2 |
Chicken Run tips
Gravel in a run stops the ground from turning into a muddy, smelly mess. Washed stone of about 3/8 to 3/4 inch drains well; some keepers add sand or wood chips on top in part of the run for dust bathing.
Related: How Much #57 Stone for a 10x12 Chicken Run?
Prep
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Ordering and delivery
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. #57 is a washed stone of roughly 1/2 to 1 inch with few fines; it drains fast but stays a little loose on its own. The scale ticket is the real weight; tons per yard here is a planning figure.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Tools for the job
A flat shovel, a steel rake, a wheelbarrow and a rented plate compactor cover most residential pads. A landscape rake or the back of a rake levels the top layer, and a long straightedge or a level string shows high and low spots before the final pass.
Questions people ask
How many tons of #57 stone for an 8x10 chicken run?
About 1.0 tons at 3 inches deep.
How many yards of #57 stone for an 8x10 chicken run?
About 0.74 cubic yards.
How many tons of #57 stone are in a cubic yard?
Roughly 1.35 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel for a Chicken Run: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Pea Gravel for an 8x10 Chicken Run?
- How Much Gravel for an 8x10 Chicken Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.