How Much Asphalt Millings for a 200 Foot Driveway?
A 200-foot driveway at the common 12-foot width covers 2,400 square feet. Spread 4 inches deep, how much asphalt millings for a 200 foot driveway comes to roughly 38.5 tons.
Volume and tonnage calculator →The math
- Area: 2,400.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 2,400.0 × 0.333 ÷ 27 = 29.63 yd³.
- Tons: × about 1.3 tons per yard = 38.5 tons.
The asphalt millings calculator does this for any size.
Related: How Much Gravel for a 200 Foot Driveway?
Asphalt millings needed by depth
| Depth | Cubic yards | Tons of asphalt millings | Tons +10% |
|---|---|---|---|
| 2 in | 14.81 | 19.3 | 21.2 |
| 4 in | 29.63 | 38.5 | 42.4 |
| 6 in | 44.44 | 57.8 | 63.6 |
| 8 in | 59.26 | 77.0 | 84.7 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 32.1 | 48.1 |
| 12 ft | 38.5 | 57.8 |
| 14 ft | 44.9 | 67.4 |
| 16 ft | 51.4 | 77.0 |
Related: How Much Asphalt Millings for 200 Square Feet?
How many loads
Plan for about 42.4 tons with waste. On a 15-ton truck that is about 3 trips; spreading while dumping (a tailgate spread) puts the stone close to where it belongs.
Base and top layer
If this is a new driveway on soil, build a base of 4 to 6 inches of coarse stone first and finish with a packable surface stone. For a refresh, 2 inches over the old surface is common. Fabric under the base helps on clay or wet ground.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Asphalt millings bind into a fairly firm surface when compacted and warmed by the sun. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Questions people ask
How many tons of asphalt millings for a 200 ft driveway?
About 38.5 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 200 ft driveway?
About 3 loads of 15 tons, including some extra.
How many tons of asphalt millings are in a cubic yard?
Roughly 1.3 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Asphalt Millings for a 100 Foot Driveway?
- How Much Asphalt Millings for a 150 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.