How Much Crusher Run for a 1000 Foot Driveway?
A 1000-foot driveway at the common 12-foot width covers 12,000 square feet. Spread 4 inches deep, how much crusher run for a 1000 foot driveway comes to roughly 229.6 tons.
Volume and tonnage calculator →The math
- Area: 12,000.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 12,000.0 × 0.333 ÷ 27 = 148.15 yd³.
- Tons: × about 1.55 tons per yard = 229.6 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 1000 Foot Driveway?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 2 in | 74.07 | 114.8 | 126.3 |
| 4 in | 148.15 | 229.6 | 252.6 |
| 6 in | 222.22 | 344.4 | 378.9 |
| 8 in | 296.30 | 459.3 | 505.2 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 191.4 | 287.0 |
| 12 ft | 229.6 | 344.4 |
| 14 ft | 267.9 | 401.9 |
| 16 ft | 306.2 | 459.3 |
Related: How Much Crusher Run for 1,000 Square Feet?
Truck loads
Plan for about 252.6 tons with waste. On a 15-ton truck that is about 17 trips; spreading while dumping (a tailgate spread) puts the stone close to where it belongs.
Base and top layer
A new driveway usually starts with a larger base stone on compacted subgrade, then a top layer that packs. Topping up an existing drive takes much less, often 2 inches. Add culverts or ditches where water crosses the drive.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of crusher run for a 1000 ft driveway?
About 229.6 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 1000 ft driveway?
About 17 loads of 15 tons, including some extra.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 600 Foot Driveway?
- How Much Crusher Run for a 750 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.