How Much Crusher Run for a 600 Foot Driveway?
How much crusher run for a 600 foot driveway: about 137.8 tons for a 12-foot-wide lane at 4 inches deep. That is 7,200 square feet and 88.89 cubic yards.
Volume and tonnage calculator →The math
- Area: 7,200.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 7,200.0 × 0.333 ÷ 27 = 88.89 yd³.
- Tons: × about 1.55 tons per yard = 137.8 tons.
The crushed stone calculator does this for any size.
Related: How Much Crusher Run for 600 Square Feet?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 2 in | 44.44 | 68.9 | 75.8 |
| 4 in | 88.89 | 137.8 | 151.6 |
| 6 in | 133.33 | 206.7 | 227.3 |
| 8 in | 177.78 | 275.6 | 303.1 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 114.8 | 172.2 |
| 12 ft | 137.8 | 206.7 |
| 14 ft | 160.7 | 241.1 |
| 16 ft | 183.7 | 275.6 |
Related: How Much Gravel for a 600 Foot Driveway?
How many loads
With about 10 percent extra, this is 151.6 tons, roughly 11 loads if the yard runs 15-ton trucks. Ask the driver to tailgate-spread it along the drive to save hours of raking.
Base and top layer
A new driveway usually starts with a larger base stone on compacted subgrade, then a top layer that packs. Topping up an existing drive takes much less, often 2 inches. Long drives benefit from a crown so water runs to the edges.
Buying the stone
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of crusher run for a 600 ft driveway?
About 137.8 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 600 ft driveway?
About 11 loads of 15 tons, including some extra.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 400 Foot Driveway?
- How Much Crusher Run for a 500 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.