How Much Crusher Run for a 500 Foot Driveway?
How much crusher run for a 500 foot driveway: about 114.8 tons for a 12-foot-wide lane at 4 inches deep. That is 6,000 square feet and 74.07 cubic yards.
Volume and tonnage calculator →The math
- Area: 6,000.0 sq ft.
- Depth in feet: 4 ÷ 12 = 0.333 ft.
- Cubic yards: 6,000.0 × 0.333 ÷ 27 = 74.07 yd³.
- Tons: × about 1.55 tons per yard = 114.8 tons.
The crushed stone calculator does this for any size.
Related: How Much Crusher Run for 500 Square Feet?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 2 in | 37.04 | 57.4 | 63.1 |
| 4 in | 74.07 | 114.8 | 126.3 |
| 6 in | 111.11 | 172.2 | 189.4 |
| 8 in | 148.15 | 229.6 | 252.6 |
Tons by driveway width
| Width | Tons at 4 in | Tons at 6 in |
|---|---|---|
| 10 ft | 95.7 | 143.5 |
| 12 ft | 114.8 | 172.2 |
| 14 ft | 134.0 | 200.9 |
| 16 ft | 153.1 | 229.6 |
Related: How Much Gravel for a 500 Foot Driveway?
Truck loads
With about 10 percent extra, this is 126.3 tons, roughly 9 loads if the yard runs 15-ton trucks. Ask the driver to tailgate-spread it along the drive to save hours of raking.
Base and top layer
If this is a new driveway on soil, build a base of 4 to 6 inches of coarse stone first and finish with a packable surface stone. For a refresh, 2 inches over the old surface is common. Fabric under the base helps on clay or wet ground.
Buying the stone
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of crusher run for a 500 ft driveway?
About 114.8 tons at 12 ft wide and 4 inches deep.
How many truck loads for a 500 ft driveway?
About 9 loads of 15 tons, including some extra.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- How to Build a Gravel Driveway That Lasts
- How Much Gravel for a 100 Foot Driveway? Tons by Depth
- A Passing Pullout on a Long Driveway
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 300 Foot Driveway?
- How Much Crusher Run for a 400 Foot Driveway?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.