How Much Crusher Run for a 12x12 Hot Tub Pad?
A 12 by 12 foot hot tub pad covers 144 square feet. At 6 inches of crusher run, plan on 2.67 cubic yards, or about 4.1 tons, which answers how much crusher run for a 12x12 hot tub pad.
Volume and tonnage calculator →The math
- Area: 144.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 144.0 × 0.500 ÷ 27 = 2.67 yd³.
- Tons: × about 1.55 tons per yard = 4.1 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 12x12 Hot Tub Pad?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 1.78 | 2.8 | 3.0 |
| 6 in | 2.67 | 4.1 | 4.5 |
| 8 in | 3.56 | 5.5 | 6.1 |
Hot Tub Pad tips
Hot tubs are heavy once full of water and people. A compacted stone pad of about 4 to 6 inches, perfectly level, works for many tubs, but check the manufacturer’s base requirements before you build.
Related: How Much Crushed Stone for a 12x12 Hot Tub Pad?
Prep
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. The scale ticket is the real weight; tons per yard here is a planning figure.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Tools for the job
A flat shovel, a steel rake, a wheelbarrow and a rented plate compactor cover most residential pads. A landscape rake or the back of a rake levels the top layer, and a long straightedge or a level string shows high and low spots before the final pass.
Questions people ask
How many tons of crusher run for a 12x12 hot tub pad?
About 4.1 tons at 6 inches deep.
How many yards of crusher run for a 12x12 hot tub pad?
About 2.67 cubic yards.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel Pad for a Hot Tub: Size, Depth, and Base
- Concrete Slab for a Hot Tub: Size, Thickness, Yards
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for a 10x12 Hot Tub Pad?
- How Much Gravel for a 10x12 Hot Tub Pad?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.