How Much Crusher Run for an 8x10 Hot Tub Pad?
An 8 by 10 foot hot tub pad covers 80 square feet. At 6 inches of crusher run, plan on 1.48 cubic yards, or about 2.3 tons, which answers how much crusher run for an 8x10 hot tub pad.
Volume and tonnage calculator →The math
- Area: 80.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 80.0 × 0.500 ÷ 27 = 1.48 yd³.
- Tons: × about 1.55 tons per yard = 2.3 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for an 8x10 Hot Tub Pad?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 0.99 | 1.5 | 1.7 |
| 6 in | 1.48 | 2.3 | 2.5 |
| 8 in | 1.98 | 3.1 | 3.4 |
Stone for a hot tub pad
A filled hot tub can weigh several tons, so the pad must be level and compacted solid. Many manufacturers accept a compacted stone base for some models, while others require concrete; follow your tub’s install guide, since that affects the warranty.
Related: How Much Crushed Stone for an 8x10 Hot Tub Pad?
Prep
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Ordering and delivery
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. The scale ticket is the real weight; tons per yard here is a planning figure.
Measuring the area
Measure length and width in feet at a few points and use the largest figures, since real sites are rarely square. For odd shapes, split the area into rectangles and circles, work out each one and add them together. Depth is the number most people underestimate: drive a stake, run a level string and measure down to the dug-out surface in several spots.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Questions people ask
How many tons of crusher run for an 8x10 hot tub pad?
About 2.3 tons at 6 inches deep.
How many yards of crusher run for an 8x10 hot tub pad?
About 1.48 cubic yards.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Pad for a Hot Tub: Size, Depth, and Base
- Concrete Slab for a Hot Tub: Size, Thickness, Yards
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for an 8x9 Hot Tub Pad?
- How Much Gravel for an 8x9 Hot Tub Pad?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.