How Much Decomposed Granite for 300 Square Feet?
How much decomposed granite for 300 square feet depends on depth. At 3 inches you need about 2.78 cubic yards, roughly 3.8 tons at 1.35 tons per yard. At 2 inches the order drops to 2.5 tons.
Volume and tonnage calculator →Decomposed granite for 300 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 2 in | 1.85 | 2.5 | 2.8 |
| 3 in | 2.78 | 3.8 | 4.1 |
| 4 in | 3.70 | 5.0 | 5.5 |
Working it out
- 300 sq ft × (3 ÷ 12) ft = 75.0 cubic feet.
- ÷ 27 = 2.78 cubic yards.
- × 1.35 tons per yard = 3.8 tons.
About decomposed granite
Decomposed granite (DG) is weathered granite broken into small particles and fines. It packs into a firm, natural-looking path surface, and stabilized versions include a binder. Expect the weight to fall in the range of 1.25 to 1.45 tons per yard.
Getting the order right
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for decomposed granite
Good uses:
- Garden paths and patios with a natural look
- Around trees and in xeriscape designs
- Stabilized DG for accessible paths
Think twice for:
- Steep grades without a stabilizer
- Areas right outside doors, since fines track in
- Driveways with heavy turning traffic
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of decomposed granite (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 15x30 area at 2 inches takes about 3.8 tons.
- Weight used here: about 1.35 tons per cubic yard.
Where estimates go wrong
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Questions people ask
How many tons of decomposed granite for 300 square feet?
About 3.8 tons at 3 inches deep.
How many cubic yards of decomposed granite for 300 square feet?
About 2.78 yards at 3 inches.
How much decomposed granite for 300 square feet at 2 inches?
About 2.5 tons, or 1.85 cubic yards.
How much does a yard of decomposed granite weigh?
About 1.25 to 1.45 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Decomposed Granite for 200 Square Feet?
- How Much Decomposed Granite for 250 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.