How Much Decomposed Granite for a 6x10 Dog Run?
How much decomposed granite for a 6x10 dog run: about 0.8 tons at 3 inches deep. The area is 60 square feet, which is 0.56 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 60.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 60.0 × 0.250 ÷ 27 = 0.56 yd³.
- Tons: × about 1.35 tons per yard = 0.8 tons.
The gravel calculator does this for any size.
Related: How Much Decomposed Granite for a 10x10 Dog Run?
Decomposed granite needed by depth
| Depth | Cubic yards | Tons of decomposed granite | Tons +10% |
|---|---|---|---|
| 2 in | 0.37 | 0.5 | 0.6 |
| 3 in | 0.56 | 0.8 | 0.8 |
| 4 in | 0.74 | 1.0 | 1.1 |
| 6 in | 1.11 | 1.5 | 1.7 |
Dog Run tips
Pea gravel is a common dog run surface because it drains and is easy on paws; some dogs dig in it, so edging and a deeper layer help. Rinse the run regularly, and pick stone without sharp edges.
Related: How Much Decomposed Granite for a 10x20 Dog Run?
Before the stone goes in
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Getting it delivered
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Decomposed granite packs into a firm, natural path when wetted and compacted in thin lifts. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Planning the cost
Quarries and landscape suppliers set their own prices, and they change by region and season. Get the price per ton, the delivery fee and the minimum order. If two products will both work, compare cost per square foot at your depth rather than cost per ton.
Questions people ask
How many tons of decomposed granite for a 6x10 dog run?
About 0.8 tons at 3 inches deep.
How many yards of decomposed granite for a 6x10 dog run?
About 0.56 cubic yards.
How many tons of decomposed granite are in a cubic yard?
Roughly 1.35 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Pea Gravel for a 6x10 Dog Run?
- How Much Gravel for a 6x10 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.