How Much Decomposed Granite for a 10x10 Dog Run?
How much decomposed granite for a 10x10 dog run: about 1.2 tons at 3 inches deep. The area is 100 square feet, which is 0.93 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 100.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 100.0 × 0.250 ÷ 27 = 0.93 yd³.
- Tons: × about 1.35 tons per yard = 1.2 tons.
The gravel calculator does this for any size.
Related: How Much Decomposed Granite for a 10x20 Dog Run?
Decomposed granite needed by depth
| Depth | Cubic yards | Tons of decomposed granite | Tons +10% |
|---|---|---|---|
| 2 in | 0.62 | 0.8 | 0.9 |
| 3 in | 0.93 | 1.2 | 1.4 |
| 4 in | 1.23 | 1.7 | 1.8 |
| 6 in | 1.85 | 2.5 | 2.8 |
Dog Run tips
Pea gravel is a common dog run surface because it drains and is easy on paws; some dogs dig in it, so edging and a deeper layer help. Rinse the run regularly, and pick stone without sharp edges.
Related: How Much Decomposed Granite for an 8x10 Dog Run?
Before the stone goes in
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Buying the stone
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Decomposed granite packs into a firm, natural path when wetted and compacted in thin lifts. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Measuring the area
Measure length and width in feet at a few points and use the largest figures, since real sites are rarely square. For odd shapes, split the area into rectangles and circles, work out each one and add them together. Depth is the number most people underestimate: drive a stake, run a level string and measure down to the dug-out surface in several spots.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Questions people ask
How many tons of decomposed granite for a 10x10 dog run?
About 1.2 tons at 3 inches deep.
How many yards of decomposed granite for a 10x10 dog run?
About 0.93 cubic yards.
How many tons of decomposed granite are in a cubic yard?
Roughly 1.35 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Pea Gravel for a 10x10 Dog Run?
- How Much Gravel for a 10x10 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.