How Much Pea Gravel for a 10x10 Dog Run?
How much pea gravel for a 10x10 dog run: about 1.3 tons at 3 inches deep. The area is 100 square feet, which is 0.93 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 100.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 100.0 × 0.250 ÷ 27 = 0.93 yd³.
- Tons: × about 1.4 tons per yard = 1.3 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 10x10 Dog Run?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.62 | 0.9 | 1.0 |
| 3 in | 0.93 | 1.3 | 1.4 |
| 4 in | 1.23 | 1.7 | 1.9 |
| 6 in | 1.85 | 2.6 | 2.9 |
Stone for a dog run
Pea gravel is a common dog run surface because it drains and is easy on paws; some dogs dig in it, so edging and a deeper layer help. Rinse the run regularly, and pick stone without sharp edges.
Related: How Much Decomposed Granite for a 10x10 Dog Run?
Before the stone goes in
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Buying the stone
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. The scale ticket is the real weight; tons per yard here is a planning figure.
Common mistakes
The most frequent problem is ordering for the finished depth without allowing for compaction, which can shrink a loose layer by 10 to 20 percent. Another is skipping fabric on soft soil and watching the stone vanish into the mud over the first wet season. Spreading everything in one thick layer instead of compacted lifts also leaves a soft, rutted surface.
Planning the cost
Stone is usually priced per ton or per cubic yard, and delivery is often a separate charge based on distance. A full truckload can cost less per ton than a partial one, so it can pay to combine projects. Ask whether the quote includes tax, delivery and any small-load fee before you compare yards.
Questions people ask
How many tons of pea gravel for a 10x10 dog run?
About 1.3 tons at 3 inches deep.
How many yards of pea gravel for a 10x10 dog run?
About 0.93 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for an 8x10 Dog Run?
- How Much Decomposed Granite for an 8x10 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.