How Much Pea Gravel for an 8x10 Dog Run?
How much pea gravel for an 8x10 dog run: about 1.0 tons at 3 inches deep. The area is 80 square feet, which is 0.74 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 80.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 80.0 × 0.250 ÷ 27 = 0.74 yd³.
- Tons: × about 1.4 tons per yard = 1.0 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for an 8x10 Dog Run?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.49 | 0.7 | 0.8 |
| 3 in | 0.74 | 1.0 | 1.1 |
| 4 in | 0.99 | 1.4 | 1.5 |
| 6 in | 1.48 | 2.1 | 2.3 |
Building the dog run base
For a dog run, rounded stone such as pea gravel is gentle on paws and drains fast. Lay it about 3 inches deep over fabric and edge the run so the stone stays put.
Related: How Much Decomposed Granite for an 8x10 Dog Run?
Prep
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Getting it delivered
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. Round up by about 10 percent for compaction and uneven ground.
Planning the cost
Quarries and landscape suppliers set their own prices, and they change by region and season. Get the price per ton, the delivery fee and the minimum order. If two products will both work, compare cost per square foot at your depth rather than cost per ton.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Questions people ask
How many tons of pea gravel for an 8x10 dog run?
About 1.0 tons at 3 inches deep.
How many yards of pea gravel for an 8x10 dog run?
About 0.74 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 6x20 Dog Run?
- How Much Decomposed Granite for a 6x20 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.
