How Much Pea Gravel for a 6x20 Dog Run?
How much pea gravel for a 6x20 dog run: about 1.6 tons at 3 inches deep. The area is 120 square feet, which is 1.11 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 120.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 120.0 × 0.250 ÷ 27 = 1.11 yd³.
- Tons: × about 1.4 tons per yard = 1.6 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 6x20 Dog Run?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.74 | 1.0 | 1.1 |
| 3 in | 1.11 | 1.6 | 1.7 |
| 4 in | 1.48 | 2.1 | 2.3 |
| 6 in | 2.22 | 3.1 | 3.4 |
Dog Run tips
For a dog run, rounded stone such as pea gravel is gentle on paws and drains fast. Lay it about 3 inches deep over fabric and edge the run so the stone stays put.
Related: How Much Decomposed Granite for a 6x20 Dog Run?
Before the stone goes in
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Getting it delivered
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. Round up by about 10 percent for compaction and uneven ground.
Tools for the job
For anything bigger than a small path, rent a plate compactor; hand tampers cannot match it. A wheelbarrow, shovels, a hard rake and stakes with string are the rest of the kit. Wet the stone lightly before compacting so it binds.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Questions people ask
How many tons of pea gravel for a 6x20 dog run?
About 1.6 tons at 3 inches deep.
How many yards of pea gravel for a 6x20 dog run?
About 1.11 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for a 6x12 Dog Run?
- How Much Decomposed Granite for a 6x12 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.