How Much Does 60 Tons of Asphalt Cover?
How much does 60 tons of asphalt cover: about 4,966 square feet at 2 inches compacted and about 3,310 square feet at 3 inches, using 145 pounds per cubic foot. A thicker new surface covers less.
Asphalt tonnage calculator →Coverage by thickness
| Thickness | Square feet | Square yards |
|---|---|---|
| 1.5 in | 6,621 | 736 |
| 2 in | 4,966 | 552 |
| 2.5 in | 3,972 | 441 |
| 3 in | 3,310 | 368 |
| 4 in | 2,483 | 276 |
The math
- 60 tons × 2,000 = 120,000 lb.
- ÷ 145 lb per cu ft = 827.6 cu ft.
- ÷ (2 ÷ 12) ft = 4,966 sq ft at 2 inches.
In driveway terms
3,310 square feet is close to a 57 by 57 foot square, or a 12-foot-wide strip about 276 feet long at 3 inches. That is a large drive or a small lot.
Things to keep in mind
- Density varies from about 140 to 150 lb per cubic foot by mix.
- Waste and base dips use 5 to 10 percent more.
- Truck loads: 60 tons is about 5 typical tandem loads.
Use the asphalt tonnage calculator for exact sizes.
Where asphalt fits
Good uses:
- Driveways, parking pads and private lanes that need a smooth, sealed surface
- Overlays on old pavement that is cracked but still structurally sound
- Areas where snow will be plowed, since a paved surface does not throw stone
Less suited to:
- Ground that stays soft or wet, unless the base and drainage are fixed first
- Very small patches, where bagged cold patch is often simpler
- Jobs in cold weather, since hot mix needs warm temperatures to compact properly
Quick reference numbers
- Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 6.2 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 4.8 tons.
- Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).
Common estimating mistakes
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Questions people ask
How many square feet does 60 tons of asphalt cover at 2 inches?
About 4,966 square feet.
At 3 inches?
About 3,310 square feet.
At 1.5 inches?
About 6,621 square feet.
What density is assumed?
145 lb per compacted cubic foot.
Should I order extra?
Many estimators add 5 to 10 percent.
Related guides
- How Many Square Feet Does a Ton of Asphalt Cover?
- How Many Tons of Asphalt per 1,000 Square Feet?
- How Many Square Yards Does a Ton of Asphalt Cover?
- How Much Does 45 Tons of Asphalt Cover?
- How Much Does 50 Tons of Asphalt Cover?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.