How Much Gravel for 4,000 Square Feet?
How much gravel for 4,000 square feet depends on depth. At 4 inches you need about 49.38 cubic yards, roughly 69.1 tons at 1.4 tons per yard. Going to 6 inches raises it to 103.7 tons.
Volume and tonnage calculator →Gravel for 4,000 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 2 in | 24.69 | 34.6 | 38.0 |
| 3 in | 37.04 | 51.9 | 57.0 |
| 4 in | 49.38 | 69.1 | 76.0 |
| 6 in | 74.07 | 103.7 | 114.1 |
Working it out
- 4,000 sq ft × (4 ÷ 12) ft = 1,333.3 cubic feet.
- ÷ 27 = 49.38 cubic yards.
- × 1.4 tons per yard = 69.1 tons.
About gravel
Because ’gravel’ covers so many products, the weight per yard moves with stone size and how much fine material is in the pile. Rounded stone with no fines rolls under tires; crushed stone with fines locks together. Typical weight: 1.3 to 1.5 tons per cubic yard.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for gravel
Best suited to:
- Rural driveways and lanes where low upfront cost matters
- Drainage areas and around downspouts
- Temporary access while a site is under construction
Less suited to:
- Steep slopes, where loose stone washes downhill
- Spots plowed often, since plows push gravel into the lawn
- Areas next to doors, because stone tracks inside
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 15x30 area at 3 inches takes about 5.8 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many tons of gravel for 4,000 square feet?
About 69.1 tons at 4 inches deep.
How many cubic yards of gravel for 4,000 square feet?
About 49.38 yards at 4 inches.
How much gravel for 4,000 square feet at 2 inches?
About 34.6 tons, or 24.69 cubic yards.
How much does a yard of gravel weigh?
About 1.3 to 1.5 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Gravel for 3,000 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.