How Much Pea Gravel for 4,000 Square Feet?
How much pea gravel for 4,000 square feet depends on depth. At 3 inches you need about 37.04 cubic yards, roughly 51.9 tons at 1.4 tons per yard. Going to 4 inches raises it to 69.1 tons.
Volume and tonnage calculator →Pea gravel for 4,000 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 2 in | 24.69 | 34.6 | 38.0 |
| 3 in | 37.04 | 51.9 | 57.0 |
| 4 in | 49.38 | 69.1 | 76.0 |
Working it out
- 4,000 sq ft × (3 ÷ 12) ft = 1,000.0 cubic feet.
- ÷ 27 = 37.04 cubic yards.
- × 1.4 tons per yard = 51.9 tons.
About pea gravel
Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put. Typical weight: 1.3 to 1.5 tons per cubic yard.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Where pea gravel fits
Best suited to:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Poor fit for:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 15x30 area at 3 inches takes about 5.8 tons.
- Weight used here: about 1.4 tons per cubic yard.
Where estimates go wrong
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
Questions people ask
How many tons of pea gravel for 4,000 square feet?
About 51.9 tons at 3 inches deep.
How many cubic yards of pea gravel for 4,000 square feet?
About 37.04 yards at 3 inches.
How much pea gravel for 4,000 square feet at 2 inches?
About 34.6 tons, or 24.69 cubic yards.
How much does a yard of pea gravel weigh?
About 1.3 to 1.5 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Pea Gravel for 3,000 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.