How Much Limestone Screenings for 2,000 Square Feet?
How much limestone screenings for 2,000 square feet depends on depth. At 2 inches you need about 12.35 cubic yards, roughly 17.3 tons at 1.4 tons per yard. Going to 3 inches raises it to 25.9 tons.
Volume and tonnage calculator →Limestone screenings for 2,000 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 1 in | 6.17 | 8.6 | 9.5 |
| 2 in | 12.35 | 17.3 | 19.0 |
| 3 in | 18.52 | 25.9 | 28.5 |
Working it out
- 2,000 sq ft × (2 ÷ 12) ft = 333.3 cubic feet.
- ÷ 27 = 12.35 cubic yards.
- × 1.4 tons per yard = 17.3 tons.
About limestone screenings
Screenings hold moisture and can crust over. Use them in thin layers over a compacted stone base instead of as a thick layer on their own. Most suppliers will quote 1.3 to 1.5 tons per yard for this material.
Ordering checklist
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Where limestone screenings fits
Best suited to:
- Paver and flagstone setting beds
- Firm walking paths
- Top-dressing a compacted stone base
Think twice for:
- Deep layers on their own
- Low spots that collect water
- Under heavy vehicle traffic without a base
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of limestone screenings (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 12x24 area at 3 inches takes about 3.7 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
Questions people ask
How many tons of limestone screenings for 2,000 square feet?
About 17.3 tons at 2 inches deep.
How many cubic yards of limestone screenings for 2,000 square feet?
About 12.35 yards at 2 inches.
How much limestone screenings for 2,000 square feet at 1 inches?
About 8.6 tons, or 6.17 cubic yards.
How much does a yard of limestone screenings weigh?
About 1.3 to 1.5 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- #10 Stone (Stone Dust): Size, Uses and How Many Tons
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Limestone Screenings for 1,200 Square Feet?
- How Much Limestone Screenings for 1,500 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.