How Much Pea Gravel for 200 Square Feet?
How much pea gravel for 200 square feet depends on depth. At 3 inches you need about 1.85 cubic yards, roughly 2.6 tons at 1.4 tons per yard. Each inch of depth over 200 square feet adds about 0.62 yards.
Volume and tonnage calculator →Pea gravel for 200 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 2 in | 1.23 | 1.7 | 1.9 |
| 3 in | 1.85 | 2.6 | 2.9 |
| 4 in | 2.47 | 3.5 | 3.8 |
Working it out
- 200 sq ft × (3 ÷ 12) ft = 50.0 cubic feet.
- ÷ 27 = 1.85 cubic yards.
- × 1.4 tons per yard = 2.6 tons.
About pea gravel
Because pea gravel is round, it never fully locks. Keep depths modest on walkways and patios so it does not feel like walking on a beach, and use edging. Expect the weight to fall in the range of 1.3 to 1.5 tons per yard.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Where pea gravel fits
Best suited to:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Less suited to:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 8x16 area at 4 inches takes about 2.2 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Questions people ask
How many tons of pea gravel for 200 square feet?
About 2.6 tons at 3 inches deep.
How many cubic yards of pea gravel for 200 square feet?
About 1.85 yards at 3 inches.
How much pea gravel for 200 square feet at 2 inches?
About 1.7 tons, or 1.23 cubic yards.
How much does a yard of pea gravel weigh?
About 1.3 to 1.5 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Pea Gravel for 100 Square Feet?
- How Much Pea Gravel for 150 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.