How Much Sand for 200 Square Feet?
How much sand for 200 square feet depends on depth. At 3 inches you need about 1.85 cubic yards, roughly 2.5 tons at 1.35 tons per yard. Each inch of depth over 200 square feet adds about 0.62 yards.
Volume and tonnage calculator →Sand for 200 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 1 in | 0.62 | 0.8 | 0.9 |
| 2 in | 1.23 | 1.7 | 1.8 |
| 3 in | 1.85 | 2.5 | 2.8 |
| 4 in | 2.47 | 3.3 | 3.7 |
Working it out
- 200 sq ft × (3 ÷ 12) ft = 50.0 cubic feet.
- ÷ 27 = 1.85 cubic yards.
- × 1.35 tons per yard = 2.5 tons.
About sand
For paver bedding, concrete sand (coarse, washed) is the usual pick. Mason sand is finer and used in mortar and play areas. Most suppliers will quote 1.3 to 1.5 dry tons per yard for this material.
Before the truck comes
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for sand
Best suited to:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Think twice for:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 8x16 area at 2 inches takes about 1.1 tons.
- Weight used here: about 1.35 tons per cubic yard.
Common estimating mistakes
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Questions people ask
How many tons of sand for 200 square feet?
About 2.5 tons at 3 inches deep.
How many cubic yards of sand for 200 square feet?
About 1.85 yards at 3 inches.
How much sand for 200 square feet at 1 inches?
About 0.8 tons, or 0.62 cubic yards.
How much does a yard of sand weigh?
About 1.3 to 1.5 dry tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Sand for 100 Square Feet?
- How Much Sand for 150 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.