How Much Pea Gravel for a 10x10 Chicken Run?
A 10 by 10 foot chicken run covers 100 square feet. At 3 inches of pea gravel, plan on 0.93 cubic yards, or about 1.3 tons, which answers how much pea gravel for a 10x10 chicken run.
Volume and tonnage calculator →The math
- Area: 100.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 100.0 × 0.250 ÷ 27 = 0.93 yd³.
- Tons: × about 1.4 tons per yard = 1.3 tons.
The gravel calculator does this for any size.
Related: How Much Gravel for a 10x10 Chicken Run?
Pea gravel needed by depth
| Depth | Cubic yards | Tons of pea gravel | Tons +10% |
|---|---|---|---|
| 2 in | 0.62 | 0.9 | 1.0 |
| 3 in | 0.93 | 1.3 | 1.4 |
| 4 in | 1.23 | 1.7 | 1.9 |
| 6 in | 1.85 | 2.6 | 2.9 |
Stone for a chicken run
Chickens scratch, so a run floor of washed stone 3 to 4 inches deep holds up better than bare soil. Grade the run so water runs out of it, and hose or rake the stone clean as needed.
Related: How Much #57 Stone for a 10x10 Chicken Run?
Before the stone goes in
Remove sod and roots, level the area and slope it slightly for drainage. Install edging so the stone stays inside the footprint.
Ordering and delivery
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Pea gravel is small and rounded, comfortable underfoot, and needs edging because it rolls. Round up by about 10 percent for compaction and uneven ground.
Tools for the job
A flat shovel, a steel rake, a wheelbarrow and a rented plate compactor cover most residential pads. A landscape rake or the back of a rake levels the top layer, and a long straightedge or a level string shows high and low spots before the final pass.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Questions people ask
How many tons of pea gravel for a 10x10 chicken run?
About 1.3 tons at 3 inches deep.
How many yards of pea gravel for a 10x10 chicken run?
About 0.93 cubic yards.
How many tons of pea gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Chicken Run: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Gravel for an 8x12 Chicken Run?
- How Much #57 Stone for an 8x12 Chicken Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.