How Much Sand for 2,000 Square Feet?
How much sand for 2,000 square feet depends on depth. At 3 inches you need about 18.52 cubic yards, roughly 25.0 tons at 1.35 tons per yard. Each inch of depth over 2,000 square feet adds about 6.17 yards.
Volume and tonnage calculator →Sand for 2,000 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 1 in | 6.17 | 8.3 | 9.2 |
| 2 in | 12.35 | 16.7 | 18.3 |
| 3 in | 18.52 | 25.0 | 27.5 |
| 4 in | 24.69 | 33.3 | 36.7 |
Working it out
- 2,000 sq ft × (3 ÷ 12) ft = 500.0 cubic feet.
- ÷ 27 = 18.52 cubic yards.
- × 1.35 tons per yard = 25.0 tons.
About sand
Sand weight changes a lot with moisture. Damp sand can weigh noticeably more per yard than dry sand, so a ton of wet sand covers less area than the same ton dry. Expect the weight to fall in the range of 1.3 to 1.5 dry tons per yard.
Getting the order right
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for sand
Best suited to:
- Paver and flagstone bedding
- Leveling under above-ground pools (with the right product)
- Filling joints and backfilling pipe
Poor fit for:
- Driveway bases, since sand shifts under load
- Steep areas exposed to runoff
- Thick layers under pavers, which settle unevenly
Quick reference numbers
- Per inch over 100 sq ft: about 0.42 tons of sand (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.2 tons.
- Another size for comparison: a 20x25 area at 3 inches takes about 6.3 tons.
- Weight used here: about 1.35 tons per cubic yard.
Mistakes that throw off the order
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons of sand for 2,000 square feet?
About 25.0 tons at 3 inches deep.
How many cubic yards of sand for 2,000 square feet?
About 18.52 yards at 3 inches.
How much sand for 2,000 square feet at 1 inches?
About 8.3 tons, or 6.17 cubic yards.
How much does a yard of sand weigh?
About 1.3 to 1.5 dry tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- How Much Does a Ton of Sand Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Sand for 1,200 Square Feet?
- How Much Sand for 1,500 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.