Tons of Asphalt for 3,750 Square Feet

Tons of asphalt for 3,750 square feet: about 45.3 tons at 2 inches compacted and about 68.0 tons at 3 inches, figured at roughly 145 pounds per cubic foot. That is 417 square yards of pavement.

Asphalt tonnage calculator →

Tons by thickness

Thickness	Tons	Tons +5%
1.5 in	34.0	35.7
2 in	45.3	47.6
2.5 in	56.6	59.5
3 in	68.0	71.4
4 in	90.6	95.2

How the numbers are built

3,750 sq ft × (2 ÷ 12) ft = 625 cubic feet at 2 inches.
× 145 lb = 90,625 lb.
÷ 2,000 = 45.3 tons.

A shortcut: each inch of compacted asphalt over 1,000 square feet weighs about 6 tons. See tons of asphalt per 1,000 square feet.

What size job this is

This is a large residential driveway or a small commercial lot. A compacted stone base under the asphalt is ordered separately.

Trucks and ordering

At 3 inches, 68.0 tons is about 6 truckloads at around 14 tons each. Plants set minimum orders and charge for hauling; see asphalt hauling cost per ton.

Things that move the total

Mix density typically runs 140 to 150 lb per cubic foot.
Base condition: dips and ruts fill with extra mix.
Waste of 5 to 10 percent is a common allowance.

Run exact numbers with the asphalt tonnage calculator.

Where asphalt fits

Best suited to:

Driveways, parking pads and private lanes that need a smooth, sealed surface
Overlays on old pavement that is cracked but still structurally sound
Areas where snow will be plowed, since a paved surface does not throw stone

Think twice for:

Ground that stays soft or wet, unless the base and drainage are fixed first
Very small patches, where bagged cold patch is often simpler
Jobs in cold weather, since hot mix needs warm temperatures to compact properly

Quick reference numbers

Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
Per inch over 1,000 sq ft: about 6.2 tons.
Another size for comparison: a 20x25 area at 4 inches takes about 12.3 tons.
Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).

Common estimating mistakes

Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.

Questions people ask

How many tons of asphalt for 3,750 square feet at 2 inches?

About 45.3 tons.

How many tons for 3,750 square feet at 3 inches?

About 68.0 tons.

How many square yards is 3,750 square feet?

About 417 square yards.

What density is used here?

145 lb per compacted cubic foot, a common planning figure.

Should I add extra?

Most estimators add 5 to 10 percent for waste and uneven base.

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.