Tons of Asphalt for 9,750 Square Feet

Tons of asphalt for 9,750 square feet: about 117.8 tons at 2 inches compacted and about 176.7 tons at 3 inches, figured at roughly 145 pounds per cubic foot. That is 1,083 square yards of pavement.

Asphalt tonnage calculator →

Tons by thickness

Thickness	Tons	Tons +5%
1.5 in	88.4	92.8
2 in	117.8	123.7
2.5 in	147.3	154.6
3 in	176.7	185.6
4 in	235.6	247.4

How the numbers are built

9,750 sq ft × (2 ÷ 12) ft = 1,625 cubic feet at 2 inches.
× 145 lb = 235,625 lb.
÷ 2,000 = 117.8 tons.

Rule of thumb: roughly 6 tons per 1,000 square feet for every inch of thickness. See tons of asphalt per 1,000 square feet.

Putting the area in context

This is commercial scale: a parking lot, a long private road or a large apron. The bigger the area, the more a small change in thickness swings the total tons.

Trucks and ordering

At 3 inches, 176.7 tons is about 14 truckloads at around 14 tons each. Plants set minimum orders and charge for hauling; see asphalt hauling cost per ton.

Things that move the total

Mix density typically runs 140 to 150 lb per cubic foot.
Base condition: dips and ruts fill with extra mix.
Waste of 5 to 10 percent is a common allowance.

Run exact numbers with the asphalt tonnage calculator.

Good and poor uses for asphalt

Good uses:

Driveways, parking pads and private lanes that need a smooth, sealed surface
Overlays on old pavement that is cracked but still structurally sound
Areas where snow will be plowed, since a paved surface does not throw stone

Poor fit for:

Ground that stays soft or wet, unless the base and drainage are fixed first
Very small patches, where bagged cold patch is often simpler
Jobs in cold weather, since hot mix needs warm temperatures to compact properly

Quick reference numbers

Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
Per inch over 1,000 sq ft: about 6.2 tons.
Another size for comparison: a 10x20 area at 3 inches takes about 3.7 tons.
Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).

Common estimating mistakes

Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.

Questions people ask

How many tons of asphalt for 9,750 square feet at 2 inches?

About 117.8 tons.

How many tons for 9,750 square feet at 3 inches?

About 176.7 tons.

How many square yards is 9,750 square feet?

About 1,083 square yards.

What density is used here?

145 lb per compacted cubic foot, a common planning figure.

Should I add extra?

Most estimators add 5 to 10 percent for waste and uneven base.

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.