Tons of Asphalt per 100 Feet of 10 ft Road
Tons of asphalt per 100 feet of 10 foot road: about 18 tons at 3 inches compacted. The strip is 10 ft × 100 ft = 1,000 square feet. Shoulders, pullouts and turnarounds add to the total; measure them separately.
Asphalt tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 2 in | 12 | 1 |
| 3 in | 18 | 2 |
| 4 in | 24 | 2 |
The math
- Area: 10 × 100 = 1,000 sq ft.
- Volume at 3 in: 1,000 × 0.250 = 250 cu ft.
- × 145 lb ÷ 2,000 = 18 tons.
Road section basics
At 10 feet wide, this is a single-lane private road or farm lane. Paved roads sit on a compacted aggregate base, ordered separately from the asphalt. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the asphalt tonnage calculator.
When to choose asphalt
Works well for:
- Driveways, parking pads and private lanes that need a smooth, sealed surface
- Overlays on old pavement that is cracked but still structurally sound
- Areas where snow will be plowed, since a paved surface does not throw stone
Poor fit for:
- Ground that stays soft or wet, unless the base and drainage are fixed first
- Very small patches, where bagged cold patch is often simpler
- Jobs in cold weather, since hot mix needs warm temperatures to compact properly
Quick reference numbers
- Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 6.2 tons.
- Another size for comparison: a 12x24 area at 4 inches takes about 7.1 tons.
- Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).
Where estimates go wrong
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Questions people ask
How many tons of asphalt per 100 feet of 10 ft road?
About 18 tons at 3 inches.
How many truckloads is that?
About 2 loads at roughly 14 tons each.
How many square feet is 100 feet of 10 ft road?
1,000 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons in a Truckload of Asphalt?
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Asphalt per Mile of 10 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.