25 Cubic Yards of Crushed Stone in Tons
25 cubic yards of crushed stone in tons works out to about 35.0 tons using a planning weight of 1.4 tons per yard. Real loads land between roughly 33.8 and 37.5 tons depending on stone size, fines and moisture. That is about 70,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 25 × 1.4 = 35.0 tons.
- Low end: 25 × 1.35 = 33.8 tons.
- High end: 25 × 1.5 = 37.5 tons.
Quarries can tell you the weight per yard for their own product; use it if you have it.
What 25 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 4,050 |
| 3 in | 2,700 |
| 4 in | 2,025 |
| 6 in | 1,350 |
About crushed stone
Most quarries sell crushed stone by a size number or a screen size. Clean crushed stone drains well; stone with fines packs harder but sheds water more slowly.
Hauling 25 yards
At about 35.0 tons, this is more than one typical truckload. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices crushed stone by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Good and poor uses for crushed stone
Works well for:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Think twice for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 20x25 area at 4 inches takes about 8.6 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons is 25 yards of crushed stone?
About 35.0 tons, with a typical range of 33.8 to 37.5.
How many pounds is 25 cubic yards of crushed stone?
About 70,000 pounds.
How much area does 25 yards of crushed stone cover at 4 inches?
About 2,025 square feet.
Why does crushed stone weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Crushed Stone Cover?
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 19 Cubic Yards of Crushed Stone in Tons
- 20 Cubic Yards of Crushed Stone in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.