25 Cubic Yards of Pea Gravel in Tons
25 cubic yards of pea gravel in tons works out to about 35.0 tons using a planning weight of 1.4 tons per yard. Real loads land between roughly 32.5 and 37.5 tons depending on stone size, fines and moisture. That is about 70,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 25 × 1.4 = 35.0 tons.
- Low end: 25 × 1.3 = 32.5 tons.
- High end: 25 × 1.5 = 37.5 tons.
If your supplier quotes a different weight per yard, multiply by theirs.
What 25 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 4,050 |
| 3 in | 2,700 |
| 4 in | 2,025 |
About pea gravel
Pea gravel is small, rounded stone, usually around 3/8 inch. It is comfortable to walk on and drains well, but it shifts under car tires and needs a solid edge to stay put.
Hauling 25 yards
Plan the delivery around 35.0 tons: two or more trucks in most areas. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices pea gravel by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
When to choose pea gravel
Good uses:
- Patios, walkways and dog runs
- Play areas with proper depth and edging
- Drainage around foundations when sized properly
Think twice for:
- Driveways and steep paths, where it rolls and ruts
- Under pavers as a base
- Areas without edging
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of pea gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 14x28 area at 2 inches takes about 3.4 tons.
- Weight used here: about 1.4 tons per cubic yard.
Mistakes that throw off the order
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Questions people ask
How many tons is 25 yards of pea gravel?
About 35.0 tons, with a typical range of 32.5 to 37.5.
How many pounds is 25 cubic yards of pea gravel?
About 70,000 pounds.
How much area does 25 yards of pea gravel cover at 3 inches?
About 2,700 square feet.
Why does pea gravel weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 19 Cubic Yards of Pea Gravel in Tons
- 20 Cubic Yards of Pea Gravel in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.