25 Cubic Yards of Gravel in Tons
25 cubic yards of gravel in tons works out to about 35.0 tons using a planning weight of 1.4 tons per yard. Real loads land between roughly 32.5 and 37.5 tons depending on stone size, fines and moisture. That is about 70,000 pounds.
Volume and tonnage calculator →The conversion
- Yards × tons per yard: 25 × 1.4 = 35.0 tons.
- Low end: 25 × 1.3 = 32.5 tons.
- High end: 25 × 1.5 = 37.5 tons.
The scale ticket on delivery day is the final word on weight.
What 25 yards covers
| Depth | Square feet |
|---|---|
| 2 in | 4,050 |
| 3 in | 2,700 |
| 4 in | 2,025 |
| 6 in | 1,350 |
About gravel
Plain gravel is a loose term. Yards use it for rounded bank or river stone as well as for crushed rock, so ask whether the load is washed, crushed or a mix before you lock in a tonnage.
Hauling 25 yards
At about 35.0 tons, this is more than one typical truckload. A pickup is a poor fit for anything past a fraction of a yard; see how much gravel a half-ton pickup can carry.
Before you order
- Confirm whether the yard prices gravel by the ton or by the yard.
- Add about 10 percent for compaction and uneven ground.
- Clear a firm spot for the truck to dump.
The volume and tonnage calculator converts any area and depth into yards and tons.
Good and poor uses for gravel
Works well for:
- Rural driveways and lanes where low upfront cost matters
- Drainage areas and around downspouts
- Temporary access while a site is under construction
Less suited to:
- Steep slopes, where loose stone washes downhill
- Spots plowed often, since plows push gravel into the lawn
- Areas next to doors, because stone tracks inside
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of gravel (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 8x16 area at 3 inches takes about 1.7 tons.
- Weight used here: about 1.4 tons per cubic yard.
Common estimating mistakes
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Questions people ask
How many tons is 25 yards of gravel?
About 35.0 tons, with a typical range of 32.5 to 37.5.
How many pounds is 25 cubic yards of gravel?
About 70,000 pounds.
How much area does 25 yards of gravel cover at 4 inches?
About 2,025 square feet.
Why does gravel weight vary?
Stone size, the share of fines and moisture all change how much a yard weighs.
Is it better to buy by the ton or the yard?
Either works; just convert with the supplier’s own weight per yard so the two quotes compare fairly.
Related guides
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Yard of Crushed Stone Weigh?
- 19 Cubic Yards of Gravel in Tons
- 20 Cubic Yards of Gravel in Tons
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.