How Much Road Base for a 30x60 Pole Barn?
How much road base for a 30x60 pole barn: about 50.0 tons for a 6-inch pad covering the 1,800 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 1,800.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,800.0 × 0.500 ÷ 27 = 33.33 yd³.
- Tons: × about 1.5 tons per yard = 50.0 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 30x60 Pole Barn?
Road base needed by depth
| Depth | Cubic yards | Tons of road base | Tons +10% |
|---|---|---|---|
| 4 in | 22.22 | 33.3 | 36.7 |
| 6 in | 33.33 | 50.0 | 55.0 |
| 8 in | 44.44 | 66.7 | 73.3 |
| 12 in | 66.67 | 100.0 | 110.0 |
Pole barn pad depth
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much Crushed Stone for a 30x60 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 32x62, or 1,984 sq ft. At 6 inches that is about 55.1 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Layering the base
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Buying the stone
If you haul it yourself, a typical half-ton pickup should carry only about half a cubic yard of stone, well under what the bed looks like it can hold. Road base is a graded stone-and-fines mix built to compact into a load-bearing layer. Round up by about 10 percent for compaction and uneven ground.
Questions people ask
How many tons of road base for a 30x60 pole barn?
About 50.0 tons at 6 inches deep.
How many yards of road base for a 30x60 pad?
About 33.33 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of road base are in a cubic yard?
Roughly 1.5 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Road Base for a 30x48 Pole Barn?
- How Much Road Base for a 30x50 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.