How Much Crusher Run for a 30x60 Pole Barn?
A 30 by 60 pole barn covers 1,800 square feet. Spread 6 inches deep, the pad takes about 33.33 cubic yards, which is roughly 51.7 tons of crusher run. That answers how much crusher run for a 30x60 pole barn for a typical floor base.
Volume and tonnage calculator →The math
- Area: 1,800.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,800.0 × 0.500 ÷ 27 = 33.33 yd³.
- Tons: × about 1.55 tons per yard = 51.7 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 30x60 Pole Barn?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 22.22 | 34.4 | 37.9 |
| 6 in | 33.33 | 51.7 | 56.8 |
| 8 in | 44.44 | 68.9 | 75.8 |
| 12 in | 66.67 | 103.3 | 113.7 |
How deep the barn pad should be
Plan the pad around what the barn will hold. Hay and tools sit fine on 4 inches of compacted stone; tractors, trucks or a later slab pour justify 6 to 8 inches built up in compacted lifts.
Related: How Much Crushed Stone for a 30x60 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 32x62, or 1,984 sq ft. At 6 inches that is about 56.9 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Build it in layers
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Ordering and delivery
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. The scale ticket is the real weight; tons per yard here is a planning figure.
Questions people ask
How many tons of crusher run for a 30x60 pole barn?
About 51.7 tons at 6 inches deep.
How many yards of crusher run for a 30x60 pad?
About 33.33 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 30x48 Pole Barn?
- How Much Crusher Run for a 30x50 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.