How Much Crusher Run for a 36x36 Pole Barn?
How much crusher run for a 36x36 pole barn: about 37.2 tons for a 6-inch pad covering the 1,296 square foot footprint. Many builders extend the pad a foot or two past the walls, which adds material.
Volume and tonnage calculator →The math
- Area: 1,296.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 1,296.0 × 0.500 ÷ 27 = 24.00 yd³.
- Tons: × about 1.55 tons per yard = 37.2 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 36x36 Pole Barn?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 16.00 | 24.8 | 27.3 |
| 6 in | 24.00 | 37.2 | 40.9 |
| 8 in | 32.00 | 49.6 | 54.6 |
| 12 in | 48.00 | 74.4 | 81.8 |
Pole barn pad depth
A 4-inch layer works for storage and light use on firm soil. For equipment, vehicles or a future concrete floor, 6 to 8 inches of compacted stone is common, and soft ground may need more plus fabric underneath.
Related: How Much Crushed Stone for a 36x36 Pole Barn?
Extending the pad past the walls
Adding 1 foot on every side makes the pad 38x38, or 1,444 sq ft. At 6 inches that is about 41.4 tons. A wider apron sheds water away from the posts and gives the eave drip a place to land.
Build it in layers
Strip topsoil, level and compact the subgrade, then spread stone in lifts of about 3 to 4 inches, compacting each. A coarser base topped with a finer, packable stone often makes the most solid floor.
Buying the stone
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. Ask your supplier for their own tons-per-yard number, since stone source and moisture change it.
Questions people ask
How many tons of crusher run for a 36x36 pole barn?
About 37.2 tons at 6 inches deep.
How many yards of crusher run for a 36x36 pad?
About 24.00 cubic yards at 6 inches.
How deep should a pole barn gravel pad be?
About 4 inches for light use and 6 to 8 inches for vehicles or a future slab.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Should I put landscape fabric under the stone?
On soft or clay soil, a woven geotextile keeps stone from sinking into the dirt and makes the layer last longer.
Related guides
- Gravel for a Pole Barn Floor: Best Stone, Depth and Tons
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crusher Run for a 30x60 Pole Barn?
- How Much Crusher Run for a 32x48 Pole Barn?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.