How Many Pavers for a 14x20 Patio?
A 14 by 20 foot patio covers 280 square feet. With common 4x8 inch brick pavers at about 4.5 per square foot, how many pavers for a 14x20 patio comes to 1,260 pavers, plus waste.
Volume and tonnage calculator →Paver count by size
| Paver size (in) | Per sq ft | Pavers needed | With 10% waste |
|---|---|---|---|
| 4x8 | 4.5 | 1,260 | 1,386 |
| 6x6 | 4 | 1,120 | 1,232 |
| 6x9 | 2.67 | 748 | 823 |
| 12x12 | 1 | 280 | 308 |
| 16x16 | 0.5625 | 158 | 174 |
| 24x24 | 0.25 | 70 | 77 |
Per-square-foot counts are nominal; actual pavers are slightly smaller to allow for joints, so check the count printed on the pallet or product sheet.
Related: How Much Gravel for a 14x20 Patio?
Cuts and waste
Add about 5 percent for a simple square patio with a straight running bond, and 10 to 15 percent for herringbone, curves or many cuts along the edges.
Base and sand for a 14x20 patio
Plan on roughly 4.8 tons of paver base at 4 inches compacted and about 0.86 cubic yards of bedding sand at 1 inch. Clay or freeze-thaw areas often use 6 inches of base. The paver calculator runs base, sand and paver counts together.
Related: How Much Paver Base for a 14x20 Patio?
Finishing touches
Edge restraint along every open side keeps the pavers from spreading. After compacting the pavers, sweep polymeric or joint sand into the gaps.
Slope and drainage
Set string lines with a slight fall away from the building before compacting the base. A consistent slope is much easier to build into the base than to fix in the sand layer.
Measuring the patio
Lay out the patio with stakes and string, square it with the 3-4-5 method and measure. Measure out to the edge restraint, since base should extend a few inches beyond the pavers on each side.
Common mistakes
Many DIY patios settle because the base was not compacted in lifts. Others use more than an inch of sand or skip the slope away from the house. Keep the sand bed thin and even.
Questions people ask
How many 4x8 pavers for a 14x20 patio?
About 1,260, or 1,386 with 10% waste.
How many 12x12 pavers for a 14x20 patio?
About 280, or 308 with 10% waste.
How many square feet is a 14x20 patio?
280 square feet.
How much extra should I order for pavers?
About 5 percent for simple layouts and 10 to 15 percent for complex patterns.
How deep should paver base be for a patio?
About 4 inches compacted for patios, more in clay or cold climates.
Related guides
- How Many Pavers per Square Foot? Size Chart
- How Much Paver Base Do I Need? Depth and Tons
- How Deep Should Paver Base Be? Patio vs Driveway
- How Much Sand for Pavers? Bedding and Joint Sand
- Paver Edge Restraint: Types and How to Install It
- How Much Does a Pallet of Pavers Weigh?
- How Many Pavers for a 14x14 Patio?
- How Many Pavers for a 14x16 Patio?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.