How Much Crusher Run for a 9x9 Hot Tub Pad?
How much crusher run for a 9x9 hot tub pad: about 2.3 tons at 6 inches deep. The area is 81 square feet, which is 1.50 cubic yards at that depth.
Volume and tonnage calculator →The math
- Area: 81.0 sq ft.
- Depth in feet: 6 ÷ 12 = 0.500 ft.
- Cubic yards: 81.0 × 0.500 ÷ 27 = 1.50 yd³.
- Tons: × about 1.55 tons per yard = 2.3 tons.
The crushed stone calculator does this for any size.
Related: How Much Gravel for a 9x9 Hot Tub Pad?
Crusher run needed by depth
| Depth | Cubic yards | Tons of crusher run | Tons +10% |
|---|---|---|---|
| 4 in | 1.00 | 1.6 | 1.7 |
| 6 in | 1.50 | 2.3 | 2.6 |
| 8 in | 2.00 | 3.1 | 3.4 |
Stone for a hot tub pad
Hot tubs are heavy once full of water and people. A compacted stone pad of about 4 to 6 inches, perfectly level, works for many tubs, but check the manufacturer’s base requirements before you build.
Related: How Much Crushed Stone for a 9x9 Hot Tub Pad?
Before the stone goes in
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Ordering and delivery
Most quarries and landscape yards deliver by the ton; ask whether there is a minimum and a delivery fee, and where the driver can dump without damaging your lawn. Crusher run mixes stone and stone dust, so it packs nearly solid when compacted in layers. Round up by about 10 percent for compaction and uneven ground.
Measuring the area
Use a long tape and measure each side twice. If the ground slopes, measure depth at the high and low ends and average them. Irregular outlines can be broken into simple rectangles, triangles and circles; add the pieces for the total square footage before converting to tons.
Common mistakes
People often forget that compaction reduces volume, so they come up short. Others order clean, round stone where a packable crushed stone with fines would have stayed put. Finally, dumping the whole load in one pile far from the work area adds hours of wheelbarrow trips.
Questions people ask
How many tons of crusher run for a 9x9 hot tub pad?
About 2.3 tons at 6 inches deep.
How many yards of crusher run for a 9x9 hot tub pad?
About 1.50 cubic yards.
How many tons of crusher run are in a cubic yard?
Roughly 1.55 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel Pad for a Hot Tub: Size, Depth, and Base
- Concrete Slab for a Hot Tub: Size, Thickness, Yards
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Crushed Stone for an 8x10 Hot Tub Pad?
- How Much Gravel for an 8x10 Hot Tub Pad?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.