How Much Gravel for a 10x20 Dog Run?
A 10 by 20 foot dog run covers 200 square feet. At 3 inches of gravel, plan on 1.85 cubic yards, or about 2.6 tons, which answers how much gravel for a 10x20 dog run.
Volume and tonnage calculator →The math
- Area: 200.0 sq ft.
- Depth in feet: 3 ÷ 12 = 0.250 ft.
- Cubic yards: 200.0 × 0.250 ÷ 27 = 1.85 yd³.
- Tons: × about 1.4 tons per yard = 2.6 tons.
The gravel calculator does this for any size.
Related: How Much Decomposed Granite for a 10x20 Dog Run?
Gravel needed by depth
| Depth | Cubic yards | Tons of gravel | Tons +10% |
|---|---|---|---|
| 2 in | 1.23 | 1.7 | 1.9 |
| 3 in | 1.85 | 2.6 | 2.9 |
| 4 in | 2.47 | 3.5 | 3.8 |
| 6 in | 3.70 | 5.2 | 5.7 |
Building the dog run base
Pea gravel is a common dog run surface because it drains and is easy on paws; some dogs dig in it, so edging and a deeper layer help. Rinse the run regularly, and pick stone without sharp edges.
Related: How Much Gravel for a 10x10 Dog Run?
Before the stone goes in
Clear vegetation, rake the soil level and compact it. Lay fabric overlapped at the seams and set edging before spreading the stone.
Ordering and delivery
Small dump trucks commonly carry around 5 to 10 tons and tri-axles more, but loads vary by truck and state, so ask the yard what fits in one trip. Gravel is a broad label, so confirm whether the yard means crushed or rounded stone and whether it carries fines. Round up by about 10 percent for compaction and uneven ground.
Planning the cost
Quarries and landscape suppliers set their own prices, and they change by region and season. Get the price per ton, the delivery fee and the minimum order. If two products will both work, compare cost per square foot at your depth rather than cost per ton.
Tools for the job
A flat shovel, a steel rake, a wheelbarrow and a rented plate compactor cover most residential pads. A landscape rake or the back of a rake levels the top layer, and a long straightedge or a level string shows high and low spots before the final pass.
Questions people ask
How many tons of gravel for a 10x20 dog run?
About 2.6 tons at 3 inches deep.
How many yards of gravel for a 10x20 dog run?
About 1.85 cubic yards.
How many tons of gravel are in a cubic yard?
Roughly 1.4 tons for planning, but suppliers vary with stone size and moisture.
Do I need to compact it?
Yes for anything that carries weight. Compact in lifts of a few inches with a plate compactor.
Related guides
- Gravel Dog Run: Best Stone, Depth, and Drainage
- How Much Does a Ton of Gravel Cover? Depth Chart
- Tons to Cubic Yards for Gravel: Conversion Chart
- Crushed Stone vs Gravel: Differences and Best Uses
- Geotextile Fabric for Driveways: Woven vs Nonwoven and How Much You Need
- Compacting a Driveway Gravel Base in Lifts
- How Much Decomposed Granite for a 10x10 Dog Run?
- How Much Pea Gravel for a 10x20 Dog Run?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.