How Much Paver Base for a 20x30 Patio?
How much paver base for a 20x30 patio: about 10.4 tons at 4 inches compacted, or 15.6 tons at 6 inches. The patio is 600 square feet.
Volume and tonnage calculator →Paver base by depth
| Base depth | Cubic yards | Tons | 0.5 cu ft bags |
|---|---|---|---|
| 4 in | 7.41 | 10.4 | 400 |
| 5 in | 9.26 | 13.0 | 500 |
| 6 in | 11.11 | 15.6 | 600 |
| 8 in | 14.81 | 20.7 | 800 |
Tons use about 1.4 tons per cubic yard. Bag counts assume 0.5 cubic foot bags, a common size for bagged paver base; check yours.
Related: How Much Gravel for a 20x30 Patio?
4 or 6 inches?
Patios that only see foot traffic usually get 4 inches. Clay soil, poor drainage and cold winters call for 6 inches. Driveways need much more. See how deep paver base should be.
Buying base
At 4 inches this is about 400 small bags, which is a lot of lifting. Bulk paver base or crushed stone with fines (often sold as crusher run, road base or 3/4 minus) costs far less per ton.
Related: How Much Road Base for a 20x30 Driveway?
Compaction
Spread the base in 2 to 3 inch lifts, dampen it and run a plate compactor over each lift. Slope the base about 1/8 to 1/4 inch per foot away from the house. Then screed 1 inch of bedding sand on top.
Measuring the patio
Lay out the patio with stakes and string, square it with the 3-4-5 method and measure. Measure out to the edge restraint, since base should extend a few inches beyond the pavers on each side.
Ordering materials
Pavers often come by the pallet, and a pallet’s coverage is printed on the product sheet. Order base and sand at the same time to save delivery fees. Keep a few extra pavers from the same batch for future repairs, since color can vary between batches.
Slope and drainage
Patios should slope away from the house about 1/8 to 1/4 inch per foot so water does not pool against the foundation. Build the slope into the compacted base so the sand bed and pavers stay a consistent thickness.
Questions people ask
How many tons of paver base for a 20x30 patio?
About 10.4 tons at 4 inches or 15.6 at 6 inches.
How many bags of paver base for a 20x30 patio?
About 400 half-cubic-foot bags at 4 inches.
How thick should paver base be?
About 4 inches for patios, 6 or more for clay or cold climates.
What can I use as paver base?
Crushed stone with fines, such as 3/4 minus, crusher run or road base.
How much sand goes under pavers?
About 1 inch of bedding sand over the compacted base.
Related guides
- How Many Pavers per Square Foot? Size Chart
- How Much Paver Base Do I Need? Depth and Tons
- How Deep Should Paver Base Be? Patio vs Driveway
- How Much Sand for Pavers? Bedding and Joint Sand
- Paver Edge Restraint: Types and How to Install It
- How Much Does a Pallet of Pavers Weigh?
- How Much Paver Base for a 20x20 Patio?
- How Much Paver Base for a 20x24 Patio?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.