How Much Recycled Concrete Aggregate for 200 Square Feet?
How much recycled concrete aggregate for 200 square feet depends on depth. At 4 inches you need about 2.47 cubic yards, roughly 3.2 tons at 1.3 tons per yard. Going to 6 inches raises it to 4.8 tons.
Volume and tonnage calculator →Recycled concrete aggregate for 200 sq ft by depth
| Depth | Cubic yards | Tons | Tons +10% |
|---|---|---|---|
| 3 in | 1.85 | 2.4 | 2.6 |
| 4 in | 2.47 | 3.2 | 3.5 |
| 6 in | 3.70 | 4.8 | 5.3 |
Working it out
- 200 sq ft × (4 ÷ 12) ft = 66.7 cubic feet.
- ÷ 27 = 2.47 cubic yards.
- × 1.3 tons per yard = 3.2 tons.
About recycled concrete aggregate
Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base. Expect the weight to fall in the range of 1.2 to 1.4 tons per yard.
Getting the order right
- Measure odd shapes in pieces. Split curves and L-shapes into rectangles and add them.
- Add a margin. About 10 percent covers compaction and low spots.
- Bulk or bags. Bulk delivery is the practical choice here.
- Prep first. Remove sod, compact the subgrade and set edging before the stone arrives.
Use the volume and tonnage calculator for any other size.
Good and poor uses for recycled concrete aggregate
Good uses:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Less suited to:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 10x20 area at 3 inches takes about 2.4 tons.
- Weight used here: about 1.3 tons per cubic yard.
Where estimates go wrong
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Questions people ask
How many tons of recycled concrete aggregate for 200 square feet?
About 3.2 tons at 4 inches deep.
How many cubic yards of recycled concrete aggregate for 200 square feet?
About 2.47 yards at 4 inches.
How much recycled concrete aggregate for 200 square feet at 3 inches?
About 2.4 tons, or 1.85 cubic yards.
How much does a yard of recycled concrete aggregate weigh?
About 1.2 to 1.4 tons.
Should I add extra?
Yes, about 10 percent is a common allowance.
Related guides
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons to Cubic Yards for Gravel: Conversion Chart
- How Much Does a Ton of Gravel Cover? Depth Chart
- How Much Recycled Concrete Aggregate for 100 Square Feet?
- How Much Recycled Concrete Aggregate for 150 Square Feet?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.