Tons of Asphalt per Mile of 14 ft Road

Tons of asphalt per mile of 14 foot road: about 1,340 tons at 3 inches compacted. The strip is 14 ft × 5,280 ft = 73,920 square feet. On a job this long, half an inch of extra depth adds a lot of tons.

Asphalt tonnage calculator →

Tons by depth

Depth	Tons	Truckloads (~14 t)
2 in	893	64
3 in	1,340	96
4 in	1,786	128

The math

Area: 14 × 5,280 = 73,920 sq ft.
Volume at 3 in: 73,920 × 0.250 = 18,480 cu ft.
× 145 lb ÷ 2,000 = 1,340 tons.

Building a road this width

At 14 feet wide, this is a single-lane private road or farm lane. Paved roads sit on a compacted aggregate base, ordered separately from the asphalt. Crown the surface so water sheds to ditches on both sides.

Practical notes

Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
Waste. Allow 5 to 10 percent.
Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.

Check other sizes with the asphalt tonnage calculator.

Where asphalt fits

Best suited to:

Driveways, parking pads and private lanes that need a smooth, sealed surface
Overlays on old pavement that is cracked but still structurally sound
Areas where snow will be plowed, since a paved surface does not throw stone

Poor fit for:

Ground that stays soft or wet, unless the base and drainage are fixed first
Very small patches, where bagged cold patch is often simpler
Jobs in cold weather, since hot mix needs warm temperatures to compact properly

Quick reference numbers

Per inch over 100 sq ft: about 0.62 tons of asphalt (0.31 cubic yards).
Per inch over 1,000 sq ft: about 6.2 tons.
Another size for comparison: a 12x24 area at 4 inches takes about 7.1 tons.
Weight used here: about 2.0 tons per cubic yard (roughly 145 lb per compacted cubic foot).

Common estimating mistakes

Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.

Questions people ask

How many tons of asphalt per mile of 14 ft road?

About 1,340 tons at 3 inches.

How many truckloads is that?

About 96 loads at roughly 14 tons each.

How many square feet is mile of 14 ft road?

73,920 square feet.

Should I add extra for waste?

Yes, 5 to 10 percent is common.

Does this include the shoulders?

No. Measure shoulders and pullouts separately and add them.

As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.