Tons of Crushed Stone per Mile of 14 ft Road
Tons of crushed stone per mile of 14 foot road: about 1,278 tons at 4 inches deep. The strip is 14 ft × 5,280 ft = 73,920 square feet. On a job this long, half an inch of extra depth adds a lot of tons.
Volume and tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 3 in | 958 | 69 |
| 4 in | 1,278 | 92 |
| 6 in | 1,916 | 137 |
| 8 in | 2,555 | 183 |
The math
- Area: 14 × 5,280 = 73,920 sq ft.
- Volume at 4 in: 73,920 × 0.333 = 24,640 cu ft (913 cubic yards).
- × 1.4 tons per yard = 1,278 tons.
What goes into the section
A 14-foot width fits one lane of traffic. Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the volume and tonnage calculator.
Good and poor uses for crushed stone
Best suited to:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Less suited to:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 12x24 area at 4 inches takes about 5.0 tons.
- Weight used here: about 1.4 tons per cubic yard.
Common estimating mistakes
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Forgetting that compaction shrinks loose material. A loose 4-inch spread of a dense-graded stone may finish closer to 3 inches after rolling.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
Questions people ask
How many tons of crushed stone per mile of 14 ft road?
About 1,278 tons at 4 inches.
How many truckloads is that?
About 92 loads at roughly 14 tons each.
How many square feet is mile of 14 ft road?
73,920 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Crushed Stone per Mile of 12 ft Road
- Tons of Crushed Stone per 100 Feet of 12 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.