Tons of Crushed Stone per Mile of 22 ft Road
Tons of crushed stone per mile of 22 foot road: about 2,008 tons at 4 inches deep. The strip is 22 ft × 5,280 ft = 116,160 square feet. On a job this long, half an inch of extra depth adds a lot of tons.
Volume and tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 3 in | 1,506 | 108 |
| 4 in | 2,008 | 144 |
| 6 in | 3,012 | 216 |
| 8 in | 4,015 | 287 |
The math
- Area: 22 × 5,280 = 116,160 sq ft.
- Volume at 4 in: 116,160 × 0.333 = 38,720 cu ft (1,434 cubic yards).
- × 1.4 tons per yard = 2,008 tons.
Road section basics
At 22 feet wide, this is a two-lane road width. Crushed stone has fractured faces, so the pieces interlock when compacted. That is why it holds a driveway or pad shape better than round stone of the same size. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the volume and tonnage calculator.
Good and poor uses for crushed stone
Good uses:
- Driveway top courses and parking pads
- Shed and hot tub bases
- Backfill behind walls when a clean size is used
Poor fit for:
- Barefoot areas, since angular stone is rough
- Play areas
- Places that need a smooth rolling surface for wheels
Quick reference numbers
- Per inch over 100 sq ft: about 0.43 tons of crushed stone (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.3 tons.
- Another size for comparison: a 20x25 area at 3 inches takes about 6.5 tons.
- Weight used here: about 1.4 tons per cubic yard.
Common estimating mistakes
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons of crushed stone per mile of 22 ft road?
About 2,008 tons at 4 inches.
How many truckloads is that?
About 144 loads at roughly 14 tons each.
How many square feet is mile of 22 ft road?
116,160 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Crushed Stone per Mile of 20 ft Road
- Tons of Crushed Stone per 100 Feet of 20 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.