Tons of Recycled Concrete Aggregate per Mile of 16 ft Road
Tons of recycled concrete aggregate per mile of 16 foot road: about 1,356 tons at 4 inches deep. The strip is 16 ft × 5,280 ft = 84,480 square feet. Long runs magnify small depth changes, so pin the depth down before ordering.
Volume and tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 3 in | 1,017 | 73 |
| 4 in | 1,356 | 97 |
| 6 in | 2,034 | 146 |
| 8 in | 2,712 | 194 |
The math
- Area: 16 × 5,280 = 84,480 sq ft.
- Volume at 4 in: 84,480 × 0.333 = 28,160 cu ft (1,043 cubic yards).
- × 1.3 tons per yard = 1,356 tons.
Building a road this width
At 16 feet wide, two cars can meet with care. Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the volume and tonnage calculator.
Good and poor uses for recycled concrete aggregate
Best suited to:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Poor fit for:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 15x30 area at 4 inches takes about 7.2 tons.
- Weight used here: about 1.3 tons per cubic yard.
Mistakes that throw off the order
- Measuring only the main rectangle. Aprons, turnouts and curved edges add real square footage.
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Ignoring the base. A thin surface layer over soft soil fails early no matter how much material is on top.
- Skipping drainage. Water sitting under any surface softens the base and leads to ruts and potholes.
Questions people ask
How many tons of recycled concrete aggregate per mile of 16 ft road?
About 1,356 tons at 4 inches.
How many truckloads is that?
About 97 loads at roughly 14 tons each.
How many square feet is mile of 16 ft road?
84,480 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Recycled Concrete Aggregate per Mile of 14 ft Road
- Recycled Concrete Aggregate Tons per 100 Feet, 14 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.