Tons of Recycled Concrete Aggregate per Mile of 32 ft Road
Tons of recycled concrete aggregate per mile of 32 foot road: about 2,712 tons at 4 inches deep. The strip is 32 ft × 5,280 ft = 168,960 square feet. Shoulders, pullouts and turnarounds add to the total; measure them separately.
Volume and tonnage calculator →Tons by depth
| Depth | Tons | Truckloads (~14 t) |
|---|---|---|
| 3 in | 2,034 | 146 |
| 4 in | 2,712 | 194 |
| 6 in | 4,068 | 291 |
| 8 in | 5,423 | 388 |
The math
- Area: 32 × 5,280 = 168,960 sq ft.
- Volume at 4 in: 168,960 × 0.333 = 56,320 cu ft (2,086 cubic yards).
- × 1.3 tons per yard = 2,712 tons.
What goes into the section
A 32-foot width gives two full lanes. Recycled concrete aggregate is crushed old concrete. It compacts well and often costs less than virgin stone, which makes it a common driveway and pad base. Crown the surface so water sheds to ditches on both sides.
Practical notes
- Phasing. Large tonnages are delivered over days; schedule spreading and compaction to keep up with trucks.
- Waste. Allow 5 to 10 percent.
- Hauling. Distance from the quarry or plant often costs as much as the material on long jobs; see asphalt hauling cost per ton.
Check other sizes with the volume and tonnage calculator.
When to choose recycled concrete aggregate
Good uses:
- Driveway and pad bases
- Temporary construction entrances
- Fill under slabs when compacted in lifts
Poor fit for:
- Near ponds, streams or sensitive plants, since fresh crush can raise pH
- Decorative top layers
- Drainage layers, unless the product is clean and screened
Quick reference numbers
- Per inch over 100 sq ft: about 0.40 tons of recycled concrete aggregate (0.31 cubic yards).
- Per inch over 1,000 sq ft: about 4.0 tons.
- Another size for comparison: a 20x25 area at 4 inches takes about 8.0 tons.
- Weight used here: about 1.3 tons per cubic yard.
Common estimating mistakes
- Using inches as if they were feet. Depth has to be divided by 12 before you multiply; skipping that step inflates the order twelvefold.
- Ordering exactly the math. Uneven ground and spillage nearly always need a little more than the flat calculation.
- Assuming every supplier uses the same weight. Two yards selling the same product name can quote different tons per yard.
- Mixing up cubic yards and tons. Yards are volume, tons are weight; convert with the product’s weight per yard.
Questions people ask
How many tons of recycled concrete aggregate per mile of 32 ft road?
About 2,712 tons at 4 inches.
How many truckloads is that?
About 194 loads at roughly 14 tons each.
How many square feet is mile of 32 ft road?
168,960 square feet.
Should I add extra for waste?
Yes, 5 to 10 percent is common.
Does this include the shoulders?
No. Measure shoulders and pullouts separately and add them.
Related guides
- How Many Tons of Gravel in a Dump Truck? Loads and Coverage
- Asphalt Hauling Cost Per Ton: What Drives the Delivered Price
- Crushed Stone vs Gravel: Differences and Best Uses
- Tons of Recycled Concrete Aggregate per Mile of 28 ft Road
- Recycled Concrete Aggregate Tons per 100 Feet, 28 ft Road
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.