How Many Pavers for a 10x14 Patio?
How many pavers for a 10x14 patio: about 630 standard 4x8 inch pavers to cover 140 square feet, or 693 with 10 percent extra for cuts and breakage.
Volume and tonnage calculator →Paver count by size
| Paver size (in) | Per sq ft | Pavers needed | With 10% waste |
|---|---|---|---|
| 4x8 | 4.5 | 630 | 693 |
| 6x6 | 4 | 560 | 616 |
| 6x9 | 2.67 | 374 | 412 |
| 12x12 | 1 | 140 | 154 |
| 16x16 | 0.5625 | 79 | 87 |
| 24x24 | 0.25 | 35 | 39 |
Per-square-foot counts are nominal; actual pavers are slightly smaller to allow for joints, so check the count printed on the pallet or product sheet.
Related: How Much Gravel for a 10x14 Patio?
How much waste to add
Straight patterns with few cuts waste around 5 percent. Herringbone and diagonal layouts, curved borders or a lot of obstacles can waste 10 to 15 percent. Keep a few spares for future repairs.
Base and sand for a 10x14 patio
Under the pavers, a patio usually gets about 4 inches of compacted paver base, which is roughly 2.4 tons for this size, plus about 1 inch of bedding sand, around 0.43 cubic yards. The paver calculator runs base, sand and paver counts together.
Related: How Much Paver Base for a 10x14 Patio?
Finishing touches
Edge restraint along every open side keeps the pavers from spreading. After compacting the pavers, sweep polymeric or joint sand into the gaps.
Slope and drainage
Patios should slope away from the house about 1/8 to 1/4 inch per foot so water does not pool against the foundation. Build the slope into the compacted base so the sand bed and pavers stay a consistent thickness.
Common mistakes
Many DIY patios settle because the base was not compacted in lifts. Others use more than an inch of sand or skip the slope away from the house. Keep the sand bed thin and even.
Ordering materials
Buy pavers from one production run where possible so the color matches. Ask how many square feet a pallet covers and whether partial pallets are sold. Bulk base and sand delivered together usually beat bagged products on cost.
Questions people ask
How many 4x8 pavers for a 10x14 patio?
About 630, or 693 with 10% waste.
How many 12x12 pavers for a 10x14 patio?
About 140, or 154 with 10% waste.
How many square feet is a 10x14 patio?
140 square feet.
How much extra should I order for pavers?
About 5 percent for simple layouts and 10 to 15 percent for complex patterns.
How deep should paver base be for a patio?
About 4 inches compacted for patios, more in clay or cold climates.
Related guides
- How Many Pavers per Square Foot? Size Chart
- How Much Paver Base Do I Need? Depth and Tons
- How Deep Should Paver Base Be? Patio vs Driveway
- How Much Sand for Pavers? Bedding and Joint Sand
- Paver Edge Restraint: Types and How to Install It
- How Much Does a Pallet of Pavers Weigh?
- How Many Pavers for a 10x10 Patio?
- How Many Pavers for a 10x12 Patio?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.