How Much Concrete for an 8x48 Slab?
An 8 by 48 foot slab is 384 square feet. How much concrete for an 8x48 slab at the common 4-inch thickness: about 4.74 cubic yards. Most people order 5.25 yards to cover waste and an uneven base.
Concrete calculator →The math for an 8x48 slab
- Area: 8 ft × 48 ft = 384 sq ft.
- Thickness in feet: 4 in ÷ 12 = 0.333 ft.
- Volume: 384 × 0.333 = 128.0 cubic feet.
- Cubic yards: 128.0 ÷ 27 = 4.74 yd³.
- With 10% extra: 5.21 yd³.
The concrete calculator runs the same steps for any size and thickness.
Related: How Much Concrete for a 12x20 Slab?
Concrete for an 8x48 slab by thickness
| Thickness | Cubic feet | Cubic yards | Yards +10% | 80 lb bags | 60 lb bags |
|---|---|---|---|---|---|
| 4 in | 128.0 | 4.74 | 5.21 | 214 | 285 |
| 5 in | 160.0 | 5.93 | 6.52 | 267 | 356 |
| 6 in | 192.0 | 7.11 | 7.82 | 320 | 427 |
Bag counts assume about 0.60 cubic feet per 80 lb bag and 0.45 per 60 lb bag, rounded up.
Choosing the thickness
Four inches is the usual thickness for patios, walks and shed floors. Slabs that carry cars or a heavy hot tub are often poured at 5 to 6 inches, and edges are sometimes thickened where loads concentrate.
Related: How Much Concrete for a 12x24 Slab?
Placing the order
Ready-mix is priced and batched by the cubic yard (27 cubic feet). Plants commonly add a small-load fee when an order is under a set minimum, so ask about it when you call. Ordering a little extra costs far less than a second truck.
Prep before the pour
Under the slab, most residential pours sit on about 4 inches of compacted gravel. The base spreads the load, drains water away and keeps the slab from cracking as the soil freezes and thaws. Compact the base in thin lifts, and dampen it just before the pour so it does not pull water out of the mix.
Joints, mesh and rebar
Reinforcement does not stop cracks, but it holds them tight. Wire mesh or rebar set mid-depth on chairs is common for a slab that carries vehicles; fiber-reinforced mix is an option for light-duty slabs. Joints about 8 feet apart control where cracks form.
Questions people ask
How many yards of concrete for an 8x48 slab at 4 inches?
About 4.74 cubic yards, or 5.21 with 10 percent extra.
How many yards for an 8x48 slab at 6 inches?
About 7.11 cubic yards.
How many 80 lb bags for an 8x48 slab?
About 214 bags at 4 inches thick, before any waste allowance.
How many square feet is an 8x48 slab?
384 square feet.
How many 80 lb bags make a cubic yard?
About 45. Each 80 lb bag yields roughly 0.6 cubic feet, and a cubic yard is 27 cubic feet.
How thick should the base under the slab be?
About 4 inches of compacted gravel is common for residential slabs, more on soft or poorly drained soil.
Related guides
- How Much Area Does a Yard of Concrete Cover?
- How Many Bags of Concrete in a Yard? 40, 60, 80 lb
- Gravel Base Under a Concrete Slab: Depth and Tons
- How Many Yards in a Concrete Truck? Mixer Sizes
- Concrete Short Load Fee: What It Is and How to Cut It
- 60 lb vs 80 lb Concrete Bags: Yield, Count, and Cost
- Rebar vs Wire Mesh in a Slab: Which One to Use
- Cost to Pour a Concrete Slab: Per Square Foot
- How Much Concrete for an 8x40 Slab?
- How Much Concrete for an 8x45 Slab?
As an Amazon Associate, AsphaltTons.com earns from qualifying purchases. Product links below are sponsored.