Calculators

Every AsphaltTons calculator, plus guides to tonnage math and formulas. 262 guides and 18 calculators, A to Z.

Calculators

• Asphalt tonnage calculator

  Tons of hot mix and cost from length, width and thickness.

• Gravel calculator for driveway & asphalt base

  Estimate tons of gravel or crushed stone for a driveway or asphalt base from size and thickness. Default 100 lb/ft³; confirm density with your quarry.

• Asphalt price calculator & cost per ton

  Planning range for hot mix asphalt material: about $90–$130 per ton, varying by region, mix and order size. Multiply by tons with the free calculator.

• Asphalt millings calculator

  Free asphalt millings calculator: estimate tons of millings (RAP) from length, width and thickness, using a lower density than new hot mix.

• Concrete calculator: how much concrete do I need?

  Free concrete calculator: tap your project (slab, driveway, sidewalk, footing, post holes or steps) and instantly see cubic yards, cubic feet, cubic meters and 40, 60 or 80 lb bags.

• Crushed stone calculator and yards-to-tons converter

  Free crushed stone calculator: get tons and cubic yards of #57, #411, crusher run, rip rap or screenings, and convert cubic yards to tons (or tons to yards) by material.

• Asphalt driveway calculator (tons & cost)

  Estimate how many tons of asphalt your driveway needs and the material cost. Defaults: 2 in. thick, 145 lb/ft³, 5% waste. Change any value.

• Driveway rainfall runoff calculator (asphalt pavement)

  Estimate how many gallons of runoff a driveway sheds in a storm: area × rainfall × 0.623 × runoff coefficient. A 50×10 ft pad sheds ~280 gal in 1 in.

• Driveway sealer calculator

  Estimate how many gallons of driveway sealer you need from square feet, number of coats and label coverage (often about 50–100 ft² per gallon).

• Driveway slope calculator

  Free driveway slope calculator and driveway pitch calculator: convert rise and run into slope percent and degrees for drainage planning.

• Gravel calculator

  Free gravel calculator: enter length, width and depth to get cubic yards, tons, 50 lb bags and cost for pea gravel, #57 stone, crusher run or river rock.

• How to calculate asphalt tonnage (size guide)

  Tons of asphalt for common driveway sizes at 2 and 3 inches thick. Example: 50 × 10 ft at 2 in. ≈ 6.04 tons (6.34 with 5% waste). Free calculator.

• Paver and paver base calculator

  Free paver calculator: enter your patio or walkway size to get the number of pavers, tons of paver base gravel, bedding sand, 50 lb bags and estimated cost.

• Pressure washing driveway cost calculator

  Ballpark the cost to pressure wash a driveway from its square footage and your local price per square foot. Adjust the rate to match local quotes.

• Rainfall roof runoff calculator (rainwater gallons)

  Estimate how many gallons of rain run off your roof in a storm from footprint, rainfall and collection efficiency, with optional tank capture and overflow.

• Sand calculator

  Free sand calculator: get cubic yards, tons, 50 lb bags and cost for mason, concrete, play or fill sand from length, width and depth. Wet or dry density options.

• Topsoil and dirt calculator

  Free topsoil and dirt calculator: find cubic yards, tons and bag counts for topsoil, fill dirt, garden mix or clay from your area and depth, plus cost per yard.

• Free trap rock driveway calculator (tons)

  Estimate tons of trap rock for a driveway surface or base from length, width and thickness. Planning density about 100–120 lb/ft³; confirm locally.

Guides to the math

• Asphalt Calculator: Tons, Thickness & Driveway Estimates

  How an asphalt calculator turns length, width and thickness into tons (about 145 lb/ft³ for hot mix), which free tool to use, and how to get to cost.

• Asphalt Cost Per Ton & Price Calculator: Material Planning Ranges

  Read asphalt cost per ton with an asphalt price calculator mindset: plant $/ton × tonnage for mix, what installed paving adds, and how our cost-per-ton page supports planning.

• Asphalt Coverage at 1.5 Inches Thick

  An inch and a half of compacted hot mix covers about 110 square feet per ton at 145 pounds per cubic foot. One thousand square feet is about 9.1 tons. That overlay is a planning estimate, not a structural rebuild. The plant ticket is the real weight.

• Asphalt Coverage at 2.5 Inches Thick

  Two and a half inches of compacted hot mix covers about 66 square feet per ton at 145 pounds per cubic foot. One thousand square feet is about 15.1 tons. Use 2.5 inches as a planning thickness between a thin overlay and a three-inch mat.

• Asphalt Density Lbs Per Cubic Foot: The Number Behind Ton Estimates

  Asphalt density in lbs per cubic foot turns volume into tons. See typical hot-mix ranges, why plants ticket by weight, and how to avoid over-ordering.

• Asphalt Hauling Cost Per Ton: What Drives the Delivered Price

  Asphalt hauling cost per ton is the trucking part of a delivered hot-mix quote. See how distance, wait time, truck size, and plant minimums change it.

• Asphalt Millings Calculator: Tons for a Recycled Asphalt Driveway

  Estimate millings tons with a free asphalt millings calculator — RAP volume × density for a recycled asphalt driveway. Confirm supplier density; planning figures only.

• Asphalt Tonnage Calculator Guide: How to Calculate Asphalt Tons

  How to calculate asphalt tonnage for driveways — formula, sq ft tables at 2" and 3", waste %, and a free asphalt ton calculator.

• Blacktop Calculator: Tons & Square Feet for Driveways

  Blacktop and asphalt are the same paving mix, so a blacktop calculator works the same way: length × width × thickness to tons. Free calculators and steps.

• Bulk Specific Gravity of Asphalt (Gmb): T 166 Test and Math

  Bulk specific gravity of asphalt (Gmb) is the density of a compacted core or puck. The AASHTO T 166 steps, the formula, and how it sets air voids and tons.

• Crack Filler Coverage: Linear Feet per Gallon

  How far does a gallon of asphalt crack filler go? Linear feet per gallon by crack width and depth, cartridge coverage, and how to measure before you buy.

• Cut and Fill Calculations: Grid and Section Methods

  Cut and fill calculations step by step: the grid method, average end area method, swell and shrink, and turning cubic yards into truckloads and tons.

• Decomposed Granite Coverage: How Much DG You Need

  Decomposed granite coverage is about 108 square feet per cubic yard at 3 inches deep. Depths for paths and patios, tons vs yards, and stabilized DG.

• Driveway Rainfall Runoff Calculator: Asphalt Storm Gallons

  A 50×10 ft driveway sheds about 280 gallons in a 1-inch storm. How the runoff calculator works (area × rain × 0.623 × C) and why edge wash follows.

• Driveway Sealer Calculator: How Many Gallons of Sealcoat You Need

  Figure sealcoat gallons with a free driveway sealer calculator — square feet × coats ÷ label coverage. How many gallons of driveway sealer to purchase; planning math only.

• Driveway Slope Calculator: Pitch Percent, Degrees & Drainage

  Turn rise and run into grade with a free driveway slope calculator (driveway pitch calculator) — slope percent and degrees from matching units. Drainage and steepness planning only.

• How Far One Ton of Asphalt Goes at 1 Inch Thick

  One ton of compacted hot mix covers about 166 square feet, or about 18.4 square yards, at one inch and 145 pounds per cubic foot. A one-inch layer is a thin overlay or leveling course. The plant ticket is the real weight.

• How Far One Ton of Asphalt Goes at 2 Inches Thick

  At two inches and 145 pounds per cubic foot, one ton of compacted hot mix covers about 83 square feet, or about 9.2 square yards. A 20 by 30 foot area is about 7.3 tons before waste. The plant ticket is the real weight.

• How Far One Ton of Asphalt Goes at 3 Inches Thick

  At three inches and 145 pounds per cubic foot, one ton covers about 55 square feet, or about 6.1 square yards. One thousand square feet is about 18.1 tons. Splitting the depth into two lifts does not change the tons if the finish is still three inches.

• How Far One Ton of Asphalt Goes at 4 Inches Thick

  Four inches of compacted hot mix is a heavy planning mat. One ton covers about 41 square feet at 145 pounds per cubic foot, and 1,000 square feet is about 24.2 tons. The soil and the trucks decide the real section. The plant ticket is the real weight.

• How Many Tons Are in a Cubic Yard of Asphalt?

  A cubic yard is 27 cubic feet. At 145 pounds per cubic foot, 27 times 145 is 3,915 pounds, or about 1.96 tons of compacted hot mix. Loose mix in a truck is a different volume. Gravel is often planned near 1.4 tons per cubic yard.

• How Many Tons in a Truckload of Asphalt?

  How many tons in a truckload of asphalt depends on truck type, legal weight, and mix density. See typical hot-mix loads and how to plan without guessing.

• How Many Tons of Asphalt for 1,200 Square Feet?

  Twelve hundred square feet is about 14.5 tons at 2 inches and about 21.8 tons at 3 inches at 145 pounds per cubic foot. That area is a wide apron or a short lot, not a single parking stall. These are planning estimates. The plant ticket is the real weight.

• How Many Tons of Asphalt for 1,500 Square Feet?

  Fifteen hundred square feet is about 18.1 tons at 2 inches and about 27.2 tons at 3 inches at 145 pounds per cubic foot. A 30 by 50 foot area is this size. Truck use may need a thicker section than a car driveway. The ticket is the real weight.

• How Many Tons of Asphalt for 2,000 Square Feet?

  Two thousand square feet is about 24.2 tons at 2 inches, about 36.3 tons at 3 inches, and about 48.3 tons at 4 inches, at 145 pounds per cubic foot. A lot this size may include aisles. Use the thickness that matches the vehicles. The plant ticket is the real weight.

• How Many Tons of Asphalt for 500 Square Feet?

  At 145 pounds per cubic foot, 500 square feet is about 6.0 tons at 2 inches and about 9.1 tons at 3 inches. The formula is area times inches over 12 times 145 divided by 2000. Add waste only if the shape is messy. The plant ticket is the real weight.

• How Many Tons of Asphalt for 600 Square Feet?

  Six hundred square feet of compacted hot mix is about 7.3 tons at 2 inches and about 10.9 tons at 3 inches, using 145 pounds per cubic foot. A 20 by 30 foot driveway is this area. The figures are planning estimates. The plant ticket is the real weight.

• How Many Tons of Asphalt for 800 Square Feet?

  Eight hundred square feet is about 9.7 tons at 2 inches and about 14.5 tons at 3 inches, using 145 pounds per cubic foot. A 20 by 40 foot driveway is this area. Both figures are planning estimates. The plant ticket is the real weight.

• How Many Tons of Asphalt for a 10x100 Driveway?

  A 10x100 driveway is 1,000 sq ft. At 2 inches it takes about 12.1 tons of compacted asphalt; at 3 inches about 18.1 tons. Full table and math.

• How Many Tons of Asphalt for a 10x120 Driveway?

  A 10x120 driveway is 1,200 sq ft. At 2 inches it takes about 14.5 tons of compacted asphalt; at 3 inches about 21.8 tons. Full table and math.

• How Many Tons of Asphalt for a 10x150 Driveway?

  A 10x150 driveway is 1,500 sq ft. At 2 inches it takes about 18.1 tons of compacted asphalt; at 3 inches about 27.2 tons. Full table and math.

• How Many Tons of Asphalt for a 10x20 Driveway?

  A 10x20 driveway is 200 sq ft. At 2 inches it takes about 2.4 tons of compacted asphalt; at 3 inches about 3.6 tons. Full table and math.

• How Many Tons of Asphalt for a 10x200 Driveway?

  A 10x200 driveway is 2,000 sq ft. At 2 inches it takes about 24.2 tons of compacted asphalt; at 3 inches about 36.2 tons. Full table and math.

• How Many Tons of Asphalt for a 10x25 Driveway?

  A 10x25 driveway is 250 sq ft. At 2 inches it takes about 3.0 tons of compacted asphalt; at 3 inches about 4.5 tons. Full table and math.

• How Many Tons of Asphalt for a 10x30 Driveway?

  A 10x30 driveway is 300 sq ft. At 2 inches it takes about 3.6 tons of compacted asphalt; at 3 inches about 5.4 tons. Full table and math.

• How Many Tons of Asphalt for a 10x35 Driveway?

  A 10x35 driveway is 350 sq ft. At 2 inches it takes about 4.2 tons of compacted asphalt; at 3 inches about 6.3 tons. Full table and math.

• How Many Tons of Asphalt for a 10x40 Driveway?

  A 10x40 driveway is 400 sq ft. At 2 inches it takes about 4.8 tons of compacted asphalt; at 3 inches about 7.2 tons. Full table and math.

• How Many Tons of Asphalt for a 10x45 Driveway?

  A 10x45 driveway is 450 sq ft. At 2 inches it takes about 5.4 tons of compacted asphalt; at 3 inches about 8.2 tons. Full table and math.

• How Many Tons of Asphalt for a 10x50 Driveway?

  A 10x50 driveway is 500 sq ft. At 2 inches it takes about 6.0 tons of compacted asphalt; at 3 inches about 9.1 tons. Full table and math.

• How Many Tons of Asphalt for a 10x60 Driveway?

  A 10x60 driveway is 600 sq ft. At 2 inches it takes about 7.2 tons of compacted asphalt; at 3 inches about 10.9 tons. Full table and math.

• How Many Tons of Asphalt for a 10x70 Driveway?

  A 10x70 driveway is 700 sq ft. At 2 inches it takes about 8.5 tons of compacted asphalt; at 3 inches about 12.7 tons. Full table and math.

• How Many Tons of Asphalt for a 10x90 Driveway?

  A 10x90 driveway is 900 sq ft. At 2 inches it takes about 10.9 tons of compacted asphalt; at 3 inches about 16.3 tons. Full table and math.

• How Many Tons of Asphalt for a 11x100 Driveway?

  A 11x100 driveway is 1,100 sq ft. At 2 inches it takes about 13.3 tons of compacted asphalt; at 3 inches about 19.9 tons. Full table and math.

• How Many Tons of Asphalt for a 11x120 Driveway?

  A 11x120 driveway is 1,320 sq ft. At 2 inches it takes about 15.9 tons of compacted asphalt; at 3 inches about 23.9 tons. Full table and math.

• How Many Tons of Asphalt for a 11x150 Driveway?

  A 11x150 driveway is 1,650 sq ft. At 2 inches it takes about 19.9 tons of compacted asphalt; at 3 inches about 29.9 tons. Full table and math.

• How Many Tons of Asphalt for a 11x20 Driveway?

  A 11x20 driveway is 220 sq ft. At 2 inches it takes about 2.7 tons of compacted asphalt; at 3 inches about 4.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x200 Driveway?

  A 11x200 driveway is 2,200 sq ft. At 2 inches it takes about 26.6 tons of compacted asphalt; at 3 inches about 39.9 tons. Full table and math.

• How Many Tons of Asphalt for a 11x25 Driveway?

  A 11x25 driveway is 275 sq ft. At 2 inches it takes about 3.3 tons of compacted asphalt; at 3 inches about 5.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x30 Driveway?

  A 11x30 driveway is 330 sq ft. At 2 inches it takes about 4.0 tons of compacted asphalt; at 3 inches about 6.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x35 Driveway?

  A 11x35 driveway is 385 sq ft. At 2 inches it takes about 4.7 tons of compacted asphalt; at 3 inches about 7.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x40 Driveway?

  A 11x40 driveway is 440 sq ft. At 2 inches it takes about 5.3 tons of compacted asphalt; at 3 inches about 8.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x45 Driveway?

  A 11x45 driveway is 495 sq ft. At 2 inches it takes about 6.0 tons of compacted asphalt; at 3 inches about 9.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x50 Driveway?

  A 11x50 driveway is 550 sq ft. At 2 inches it takes about 6.6 tons of compacted asphalt; at 3 inches about 10.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x60 Driveway?

  A 11x60 driveway is 660 sq ft. At 2 inches it takes about 8.0 tons of compacted asphalt; at 3 inches about 12.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x70 Driveway?

  A 11x70 driveway is 770 sq ft. At 2 inches it takes about 9.3 tons of compacted asphalt; at 3 inches about 14.0 tons. Full table and math.

• How Many Tons of Asphalt for a 11x80 Driveway?

  A 11x80 driveway is 880 sq ft. At 2 inches it takes about 10.6 tons of compacted asphalt; at 3 inches about 15.9 tons. Full table and math.

• How Many Tons of Asphalt for a 11x90 Driveway?

  A 11x90 driveway is 990 sq ft. At 2 inches it takes about 12.0 tons of compacted asphalt; at 3 inches about 17.9 tons. Full table and math.

• How Many Tons of Asphalt for a 12x100 Driveway?

  A 12x100 driveway is 1,200 sq ft. At 2 inches it takes about 14.5 tons of compacted asphalt; at 3 inches about 21.8 tons. Full table and math.

• How Many Tons of Asphalt for a 12x120 Driveway?

  A 12x120 driveway is 1,440 sq ft. At 2 inches it takes about 17.4 tons of compacted asphalt; at 3 inches about 26.1 tons. Full table and math.

• How Many Tons of Asphalt for a 12x150 Driveway?

  A 12x150 driveway is 1,800 sq ft. At 2 inches it takes about 21.8 tons of compacted asphalt; at 3 inches about 32.6 tons. Full table and math.

• How Many Tons of Asphalt for a 12x20 Driveway?

  A 12x20 driveway is 240 sq ft. At 2 inches it takes about 2.9 tons of compacted asphalt; at 3 inches about 4.3 tons. Full table and math.

• How Many Tons of Asphalt for a 12x200 Driveway?

  A 12x200 driveway is 2,400 sq ft. At 2 inches it takes about 29.0 tons of compacted asphalt; at 3 inches about 43.5 tons. Full table and math.

• How Many Tons of Asphalt for a 12x25 Driveway?

  A 12x25 driveway is 300 sq ft. At 2 inches it takes about 3.6 tons of compacted asphalt; at 3 inches about 5.4 tons. Full table and math.

• How Many Tons of Asphalt for a 12x35 Driveway?

  A 12x35 driveway is 420 sq ft. At 2 inches it takes about 5.1 tons of compacted asphalt; at 3 inches about 7.6 tons. Full table and math.

• How Many Tons of Asphalt for a 12x40 Driveway?

  A 12x40 driveway is 480 sq ft. At 2 inches it takes about 5.8 tons of compacted asphalt; at 3 inches about 8.7 tons. Full table and math.

• How Many Tons of Asphalt for a 12x45 Driveway?

  A 12x45 driveway is 540 sq ft. At 2 inches it takes about 6.5 tons of compacted asphalt; at 3 inches about 9.8 tons. Full table and math.

• How Many Tons of Asphalt for a 12x50 Driveway?

  A 12x50 driveway is 600 sq ft. At 2 inches it takes about 7.2 tons of compacted asphalt; at 3 inches about 10.9 tons. Full table and math.

• How Many Tons of Asphalt for a 12x60 Driveway?

  A 12x60 driveway is 720 sq ft. At 2 inches it takes about 8.7 tons of compacted asphalt; at 3 inches about 13.1 tons. Full table and math.

• How Many Tons of Asphalt for a 12x70 Driveway?

  A 12x70 driveway is 840 sq ft. At 2 inches it takes about 10.2 tons of compacted asphalt; at 3 inches about 15.2 tons. Full table and math.

• How Many Tons of Asphalt for a 12x80 Driveway?

  A 12x80 driveway is 960 sq ft. At 2 inches it takes about 11.6 tons of compacted asphalt; at 3 inches about 17.4 tons. Full table and math.

• How Many Tons of Asphalt for a 12x90 Driveway?

  A 12x90 driveway is 1,080 sq ft. At 2 inches it takes about 13.1 tons of compacted asphalt; at 3 inches about 19.6 tons. Full table and math.

• How Many Tons of Asphalt for a 14x100 Driveway?

  A 14x100 driveway is 1,400 sq ft. At 2 inches it takes about 16.9 tons of compacted asphalt; at 3 inches about 25.4 tons. Full table and math.

• How Many Tons of Asphalt for a 14x120 Driveway?

  A 14x120 driveway is 1,680 sq ft. At 2 inches it takes about 20.3 tons of compacted asphalt; at 3 inches about 30.4 tons. Full table and math.

• How Many Tons of Asphalt for a 14x150 Driveway?

  A 14x150 driveway is 2,100 sq ft. At 2 inches it takes about 25.4 tons of compacted asphalt; at 3 inches about 38.1 tons. Full table and math.

• How Many Tons of Asphalt for a 14x20 Driveway?

  A 14x20 driveway is 280 sq ft. At 2 inches it takes about 3.4 tons of compacted asphalt; at 3 inches about 5.1 tons. Full table and math.

• How Many Tons of Asphalt for a 14x200 Driveway?

  A 14x200 driveway is 2,800 sq ft. At 2 inches it takes about 33.8 tons of compacted asphalt; at 3 inches about 50.8 tons. Full table and math.

• How Many Tons of Asphalt for a 14x25 Driveway?

  A 14x25 driveway is 350 sq ft. At 2 inches it takes about 4.2 tons of compacted asphalt; at 3 inches about 6.3 tons. Full table and math.

• How Many Tons of Asphalt for a 14x35 Driveway?

  A 14x35 driveway is 490 sq ft. At 2 inches it takes about 5.9 tons of compacted asphalt; at 3 inches about 8.9 tons. Full table and math.

• How Many Tons of Asphalt for a 14x40 Driveway?

  A 14x40 driveway is 560 sq ft. At 2 inches it takes about 6.8 tons of compacted asphalt; at 3 inches about 10.2 tons. Full table and math.

• How Many Tons of Asphalt for a 14x45 Driveway?

  A 14x45 driveway is 630 sq ft. At 2 inches it takes about 7.6 tons of compacted asphalt; at 3 inches about 11.4 tons. Full table and math.

• How Many Tons of Asphalt for a 14x50 Driveway?

  A 14x50 driveway is 700 sq ft. At 2 inches it takes about 8.5 tons of compacted asphalt; at 3 inches about 12.7 tons. Full table and math.

• How Many Tons of Asphalt for a 14x60 Driveway?

  A 14x60 driveway is 840 sq ft. At 2 inches it takes about 10.2 tons of compacted asphalt; at 3 inches about 15.2 tons. Full table and math.

• How Many Tons of Asphalt for a 14x70 Driveway?

  A 14x70 driveway is 980 sq ft. At 2 inches it takes about 11.8 tons of compacted asphalt; at 3 inches about 17.8 tons. Full table and math.

• How Many Tons of Asphalt for a 14x80 Driveway?

  A 14x80 driveway is 1,120 sq ft. At 2 inches it takes about 13.5 tons of compacted asphalt; at 3 inches about 20.3 tons. Full table and math.

• How Many Tons of Asphalt for a 14x90 Driveway?

  A 14x90 driveway is 1,260 sq ft. At 2 inches it takes about 15.2 tons of compacted asphalt; at 3 inches about 22.8 tons. Full table and math.

• How Many Tons of Asphalt for a 16x100 Driveway?

  A 16x100 driveway is 1,600 sq ft. At 2 inches it takes about 19.3 tons of compacted asphalt; at 3 inches about 29.0 tons. Full table and math.

• How Many Tons of Asphalt for a 16x120 Driveway?

  A 16x120 driveway is 1,920 sq ft. At 2 inches it takes about 23.2 tons of compacted asphalt; at 3 inches about 34.8 tons. Full table and math.

• How Many Tons of Asphalt for a 16x150 Driveway?

  A 16x150 driveway is 2,400 sq ft. At 2 inches it takes about 29.0 tons of compacted asphalt; at 3 inches about 43.5 tons. Full table and math.

• How Many Tons of Asphalt for a 16x20 Driveway?

  A 16x20 driveway is 320 sq ft. At 2 inches it takes about 3.9 tons of compacted asphalt; at 3 inches about 5.8 tons. Full table and math.

• How Many Tons of Asphalt for a 16x200 Driveway?

  A 16x200 driveway is 3,200 sq ft. At 2 inches it takes about 38.7 tons of compacted asphalt; at 3 inches about 58.0 tons. Full table and math.

• How Many Tons of Asphalt for a 16x25 Driveway?

  A 16x25 driveway is 400 sq ft. At 2 inches it takes about 4.8 tons of compacted asphalt; at 3 inches about 7.2 tons. Full table and math.

• How Many Tons of Asphalt for a 16x35 Driveway?

  A 16x35 driveway is 560 sq ft. At 2 inches it takes about 6.8 tons of compacted asphalt; at 3 inches about 10.2 tons. Full table and math.

• How Many Tons of Asphalt for a 16x45 Driveway?

  A 16x45 driveway is 720 sq ft. At 2 inches it takes about 8.7 tons of compacted asphalt; at 3 inches about 13.1 tons. Full table and math.

• How Many Tons of Asphalt for a 16x50 Driveway?

  A 16x50 driveway is 800 sq ft. At 2 inches it takes about 9.7 tons of compacted asphalt; at 3 inches about 14.5 tons. Full table and math.

• How Many Tons of Asphalt for a 16x60 Driveway?

  A 16x60 driveway is 960 sq ft. At 2 inches it takes about 11.6 tons of compacted asphalt; at 3 inches about 17.4 tons. Full table and math.

• How Many Tons of Asphalt for a 16x70 Driveway?

  A 16x70 driveway is 1,120 sq ft. At 2 inches it takes about 13.5 tons of compacted asphalt; at 3 inches about 20.3 tons. Full table and math.

• How Many Tons of Asphalt for a 16x80 Driveway?

  A 16x80 driveway is 1,280 sq ft. At 2 inches it takes about 15.5 tons of compacted asphalt; at 3 inches about 23.2 tons. Full table and math.

• How Many Tons of Asphalt for a 16x90 Driveway?

  A 16x90 driveway is 1,440 sq ft. At 2 inches it takes about 17.4 tons of compacted asphalt; at 3 inches about 26.1 tons. Full table and math.

• How Many Tons of Asphalt for a 18x100 Driveway?

  A 18x100 driveway is 1,800 sq ft. At 2 inches it takes about 21.8 tons of compacted asphalt; at 3 inches about 32.6 tons. Full table and math.

• How Many Tons of Asphalt for a 18x120 Driveway?

  A 18x120 driveway is 2,160 sq ft. At 2 inches it takes about 26.1 tons of compacted asphalt; at 3 inches about 39.1 tons. Full table and math.

• How Many Tons of Asphalt for a 18x20 Driveway?

  A 18x20 driveway is 360 sq ft. At 2 inches it takes about 4.3 tons of compacted asphalt; at 3 inches about 6.5 tons. Full table and math.

• How Many Tons of Asphalt for a 18x200 Driveway?

  A 18x200 driveway is 3,600 sq ft. At 2 inches it takes about 43.5 tons of compacted asphalt; at 3 inches about 65.2 tons. Full table and math.

• How Many Tons of Asphalt for a 18x25 Driveway?

  A 18x25 driveway is 450 sq ft. At 2 inches it takes about 5.4 tons of compacted asphalt; at 3 inches about 8.2 tons. Full table and math.

• How Many Tons of Asphalt for a 18x30 Driveway?

  A 18x30 driveway is 540 sq ft. At 2 inches it takes about 6.5 tons of compacted asphalt; at 3 inches about 9.8 tons. Full table and math.

• How Many Tons of Asphalt for a 18x35 Driveway?

  A 18x35 driveway is 630 sq ft. At 2 inches it takes about 7.6 tons of compacted asphalt; at 3 inches about 11.4 tons. Full table and math.

• How Many Tons of Asphalt for a 18x40 Driveway?

  A 18x40 driveway is 720 sq ft. At 2 inches it takes about 8.7 tons of compacted asphalt; at 3 inches about 13.1 tons. Full table and math.

• How Many Tons of Asphalt for a 18x45 Driveway?

  A 18x45 driveway is 810 sq ft. At 2 inches it takes about 9.8 tons of compacted asphalt; at 3 inches about 14.7 tons. Full table and math.

• How Many Tons of Asphalt for a 18x50 Driveway?

  A 18x50 driveway is 900 sq ft. At 2 inches it takes about 10.9 tons of compacted asphalt; at 3 inches about 16.3 tons. Full table and math.

• How Many Tons of Asphalt for a 18x60 Driveway?

  A 18x60 driveway is 1,080 sq ft. At 2 inches it takes about 13.1 tons of compacted asphalt; at 3 inches about 19.6 tons. Full table and math.

• How Many Tons of Asphalt for a 18x70 Driveway?

  A 18x70 driveway is 1,260 sq ft. At 2 inches it takes about 15.2 tons of compacted asphalt; at 3 inches about 22.8 tons. Full table and math.

• How Many Tons of Asphalt for a 18x80 Driveway?

  A 18x80 driveway is 1,440 sq ft. At 2 inches it takes about 17.4 tons of compacted asphalt; at 3 inches about 26.1 tons. Full table and math.

• How Many Tons of Asphalt for a 18x90 Driveway?

  A 18x90 driveway is 1,620 sq ft. At 2 inches it takes about 19.6 tons of compacted asphalt; at 3 inches about 29.4 tons. Full table and math.

• How Many Tons of Asphalt for a 20x100 Driveway?

  A 20x100 driveway is 2,000 sq ft. At 2 inches it takes about 24.2 tons of compacted asphalt; at 3 inches about 36.2 tons. Full table and math.

• How Many Tons of Asphalt for a 20x120 Driveway?

  A 20x120 driveway is 2,400 sq ft. At 2 inches it takes about 29.0 tons of compacted asphalt; at 3 inches about 43.5 tons. Full table and math.

• How Many Tons of Asphalt for a 20x150 Driveway?

  A 20x150 driveway is 3,000 sq ft. At 2 inches it takes about 36.2 tons of compacted asphalt; at 3 inches about 54.4 tons. Full table and math.

• How Many Tons of Asphalt for a 20x200 Driveway?

  A 20x200 driveway is 4,000 sq ft. At 2 inches it takes about 48.3 tons of compacted asphalt; at 3 inches about 72.5 tons. Full table and math.

• How Many Tons of Asphalt for a 20x25 Driveway?

  A 20x25 driveway is 500 sq ft. At 2 inches it takes about 6.0 tons of compacted asphalt; at 3 inches about 9.1 tons. Full table and math.

• How Many Tons of Asphalt for a 20x35 Driveway?

  A 20x35 driveway is 700 sq ft. At 2 inches it takes about 8.5 tons of compacted asphalt; at 3 inches about 12.7 tons. Full table and math.

• How Many Tons of Asphalt for a 20x40 Driveway?

  A 20x40 driveway is 800 sq ft. At 3 inches compacted it needs about 14.5 tons of hot mix, roughly 16 with waste. See the math for 2, 3, and 4 inches.

• How Many Tons of Asphalt for a 20x40 Driveway?

  A 20x40 driveway is 800 sq ft. At 2 inches it takes about 9.7 tons of compacted asphalt; at 3 inches about 14.5 tons. Full table and math.

• How Many Tons of Asphalt for a 20x45 Driveway?

  A 20x45 driveway is 900 sq ft. At 2 inches it takes about 10.9 tons of compacted asphalt; at 3 inches about 16.3 tons. Full table and math.

• How Many Tons of Asphalt for a 20x50 Driveway?

  A 20x50 driveway is 1,000 sq ft. At 2 inches it takes about 12.1 tons of compacted asphalt; at 3 inches about 18.1 tons. Full table and math.

• How Many Tons of Asphalt for a 20x60 Driveway?

  A 20x60 driveway is 1,200 sq ft. At 2 inches it takes about 14.5 tons of compacted asphalt; at 3 inches about 21.8 tons. Full table and math.

• How Many Tons of Asphalt for a 20x70 Driveway?

  A 20x70 driveway is 1,400 sq ft. At 2 inches it takes about 16.9 tons of compacted asphalt; at 3 inches about 25.4 tons. Full table and math.

• How Many Tons of Asphalt for a 20x80 Driveway?

  A 20x80 driveway is 1,600 sq ft. At 2 inches it takes about 19.3 tons of compacted asphalt; at 3 inches about 29.0 tons. Full table and math.

• How Many Tons of Asphalt for a 20x90 Driveway?

  A 20x90 driveway is 1,800 sq ft. At 2 inches it takes about 21.8 tons of compacted asphalt; at 3 inches about 32.6 tons. Full table and math.

• How Many Tons of Asphalt for a 22x100 Driveway?

  A 22x100 driveway is 2,200 sq ft. At 2 inches it takes about 26.6 tons of compacted asphalt; at 3 inches about 39.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x120 Driveway?

  A 22x120 driveway is 2,640 sq ft. At 2 inches it takes about 31.9 tons of compacted asphalt; at 3 inches about 47.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x150 Driveway?

  A 22x150 driveway is 3,300 sq ft. At 2 inches it takes about 39.9 tons of compacted asphalt; at 3 inches about 59.8 tons. Full table and math.

• How Many Tons of Asphalt for a 22x20 Driveway?

  A 22x20 driveway is 440 sq ft. At 2 inches it takes about 5.3 tons of compacted asphalt; at 3 inches about 8.0 tons. Full table and math.

• How Many Tons of Asphalt for a 22x200 Driveway?

  A 22x200 driveway is 4,400 sq ft. At 2 inches it takes about 53.2 tons of compacted asphalt; at 3 inches about 79.8 tons. Full table and math.

• How Many Tons of Asphalt for a 22x25 Driveway?

  A 22x25 driveway is 550 sq ft. At 2 inches it takes about 6.6 tons of compacted asphalt; at 3 inches about 10.0 tons. Full table and math.

• How Many Tons of Asphalt for a 22x30 Driveway?

  A 22x30 driveway is 660 sq ft. At 2 inches it takes about 8.0 tons of compacted asphalt; at 3 inches about 12.0 tons. Full table and math.

• How Many Tons of Asphalt for a 22x35 Driveway?

  A 22x35 driveway is 770 sq ft. At 2 inches it takes about 9.3 tons of compacted asphalt; at 3 inches about 14.0 tons. Full table and math.

• How Many Tons of Asphalt for a 22x40 Driveway?

  A 22x40 driveway is 880 sq ft. At 2 inches it takes about 10.6 tons of compacted asphalt; at 3 inches about 15.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x45 Driveway?

  A 22x45 driveway is 990 sq ft. At 2 inches it takes about 12.0 tons of compacted asphalt; at 3 inches about 17.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x50 Driveway?

  A 22x50 driveway is 1,100 sq ft. At 2 inches it takes about 13.3 tons of compacted asphalt; at 3 inches about 19.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x60 Driveway?

  A 22x60 driveway is 1,320 sq ft. At 2 inches it takes about 15.9 tons of compacted asphalt; at 3 inches about 23.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x70 Driveway?

  A 22x70 driveway is 1,540 sq ft. At 2 inches it takes about 18.6 tons of compacted asphalt; at 3 inches about 27.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x80 Driveway?

  A 22x80 driveway is 1,760 sq ft. At 2 inches it takes about 21.3 tons of compacted asphalt; at 3 inches about 31.9 tons. Full table and math.

• How Many Tons of Asphalt for a 22x90 Driveway?

  A 22x90 driveway is 1,980 sq ft. At 2 inches it takes about 23.9 tons of compacted asphalt; at 3 inches about 35.9 tons. Full table and math.

• How Many Tons of Asphalt for a 24x100 Driveway?

  A 24x100 driveway is 2,400 sq ft. At 2 inches it takes about 29.0 tons of compacted asphalt; at 3 inches about 43.5 tons. Full table and math.

• How Many Tons of Asphalt for a 24x120 Driveway?

  A 24x120 driveway is 2,880 sq ft. At 2 inches it takes about 34.8 tons of compacted asphalt; at 3 inches about 52.2 tons. Full table and math.

• How Many Tons of Asphalt for a 24x150 Driveway?

  A 24x150 driveway is 3,600 sq ft. At 2 inches it takes about 43.5 tons of compacted asphalt; at 3 inches about 65.2 tons. Full table and math.

• How Many Tons of Asphalt for a 24x20 Driveway?

  A 24x20 driveway is 480 sq ft. At 2 inches it takes about 5.8 tons of compacted asphalt; at 3 inches about 8.7 tons. Full table and math.

• How Many Tons of Asphalt for a 24x200 Driveway?

  A 24x200 driveway is 4,800 sq ft. At 2 inches it takes about 58.0 tons of compacted asphalt; at 3 inches about 87.0 tons. Full table and math.

• How Many Tons of Asphalt for a 24x25 Driveway?

  A 24x25 driveway is 600 sq ft. At 2 inches it takes about 7.2 tons of compacted asphalt; at 3 inches about 10.9 tons. Full table and math.

• How Many Tons of Asphalt for a 24x35 Driveway?

  A 24x35 driveway is 840 sq ft. At 2 inches it takes about 10.2 tons of compacted asphalt; at 3 inches about 15.2 tons. Full table and math.

• How Many Tons of Asphalt for a 24x45 Driveway?

  A 24x45 driveway is 1,080 sq ft. At 2 inches it takes about 13.1 tons of compacted asphalt; at 3 inches about 19.6 tons. Full table and math.

• How Many Tons of Asphalt for a 24x50 Driveway?

  A 24x50 driveway is 1,200 sq ft. At 2 inches it takes about 14.5 tons of compacted asphalt; at 3 inches about 21.8 tons. Full table and math.

All topics →